Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2001-10-01 → 2001-10-31 |
| MCL | Health-based | Resolved | 2001-10-01 → 2001-10-31 |
| MCL | Health-based | Resolved | 2001-10-01 → 2001-10-31 |
| MCL | Health-based | Resolved | 2001-10-01 → 2001-10-31 |
| MCL | Health-based | Resolved | 1995-10-01 → 1995-10-31 |
| MCL | Health-based | Resolved | 1995-10-01 → 1995-10-31 |
| MCL | Health-based | Resolved | 1995-10-01 → 1995-10-31 |
| MCL | Health-based | Resolved | 1995-10-01 → 1995-10-31 |
| MCL | Health-based | Resolved | 1995-07-01 → 1995-07-31 |
| MCL | Health-based | Resolved | 1995-07-01 → 1995-07-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 1900 µg/L 146% of the EPA limit, in the worst sample — 1300 µg/L | 48/48 | SYR4 | 2015–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2024 |
| Bromodichloromethane | 4.8 µg/L No EPA limit set | 12/17 | SYR4 | 2014–2019 |
| Chloroform | 8.9 µg/L No EPA limit set | 12/17 | SYR4 | 2014–2019 |
| Dibromochloromethane | 2.7 µg/L No EPA limit set | 12/17 | SYR4 | 2014–2019 |
| Lead | 370 µg/L 2467% of the EPA limit, in the worst sample — 15 µg/L | 10/43 | SYR4 | 2015–2018 |
| TTHM | 16.2 µg/L 20% of the EPA limit 80 µg/L | 10/15 | SYR4 | 2014–2019 |
| Nitrate | 260 µg/L 2.6% of the EPA limit 10000 µg/L | 8/28 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 2.6 µg/L No EPA limit set | 7/12 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 3.8 µg/L 6.3% of the EPA limit 60 µg/L | 7/12 | SYR4 | 2014–2019 |
| Barium | 8 µg/L 0.4% of the EPA limit 2000 µg/L | 5/5 | SYR4 | 2015–2019 |
| Combined Radium (-226 And -228) | 0.8000 pCi/L 16% of the EPA limit 5 pCi/L | 2/2 | SYR4 | 2015–2016 |
| Bromoform | 0.6000 µg/L No EPA limit set | 1/17 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 1.1 µg/L No EPA limit set | 1/12 | SYR4 | 2014–2019 |
| Gross Alpha, Excl. Radon And U | 2.9 pCi/L 19% of the EPA limit 15 pCi/L | 1/2 | SYR4 | 2015–2016 |
| Trichloroacetic Acid | 1.2 µg/L No EPA limit set | 1/12 | SYR4 | 2014–2019 |
91 contaminants tested, none detected
Utility contact
Frequently asked questions about Penacook Boscawen Water Pct
Is Penacook Boscawen Water Pct tap water safe to drink?
EPA monitoring detected 16 contaminants in Penacook Boscawen Water Pct's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Penacook Boscawen Water Pct's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Penacook Boscawen Water Pct serve?
Penacook Boscawen Water Pct reports serving 3,800 people in New Hampshire, per its EPA record.
Has Penacook Boscawen Water Pct had any water quality violations?
The EPA has 47 violations on file for Penacook Boscawen Water Pct, of which 37 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.