Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2024-01-01 |
| MR | Monitoring | Resolved | 2024-01-01 |
| MR | Monitoring | Resolved | 2024-01-01 |
| MON | Monitoring | Resolved | 2023-07-01 → 2023-07-31 |
| MON | Monitoring | Resolved | 2023-07-01 → 2023-07-31 |
| MON | Monitoring | Resolved | 2023-07-01 → 2023-07-31 |
| MON | Monitoring | Resolved | 2023-07-01 → 2023-07-31 |
| MON | Monitoring | Resolved | 2023-07-01 → 2023-07-31 |
| MON | Monitoring | Resolved | 2023-07-01 → 2023-07-31 |
| MR | Monitoring | Resolved | 2023-07-01 → 2023-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 118 µg/L 148% of the EPA limit, in the worst sample — 80 µg/L | 57/57 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 70.4 µg/L 117% of the EPA limit, in the worst sample — 60 µg/L | 57/57 | SYR4 | 2012–2019 |
| Bromodichloromethane | 19 µg/L No EPA limit set | 54/54 | SYR4 | 2012–2019 |
| Chloroform | 101 µg/L No EPA limit set | 54/54 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 46.8 µg/L No EPA limit set | 54/54 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 27.8 µg/L No EPA limit set | 53/54 | SYR4 | 2012–2019 |
| Dibromochloromethane | 11.7 µg/L No EPA limit set | 48/54 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 3.5 µg/L No EPA limit set | 18/54 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.3 µg/L No EPA limit set | 9/54 | SYR4 | 2012–2019 |
| Copper | 176 µg/L 14% of the EPA limit 1300 µg/L | 2/30 | SYR4 | 2014–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 1/1 | LCR | 2025 |
3 contaminants tested, none detected
Utility contact
Frequently asked questions about Nash County Water System Area 2
Is Nash County Water System Area 2 tap water safe to drink?
EPA monitoring detected 11 contaminants in Nash County Water System Area 2's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Nash County Water System Area 2's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Nash County Water System Area 2 serve?
Nash County Water System Area 2 reports serving 701 people in North Carolina, per its EPA record.
Has Nash County Water System Area 2 had any water quality violations?
The EPA has 87 violations on file for Nash County Water System Area 2, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.