Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-06-30 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-06-30 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-06-30 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-06-30 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-06-30 |
| MCL | Health-based | Resolved | 2007-01-01 → 2007-03-31 |
| MCL | Health-based | Resolved | 2007-01-01 → 2007-03-31 |
| MCL | Health-based | Resolved | 2007-01-01 → 2007-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| TTHM | 16.015 µg/L 20% of the EPA limit 80 µg/L
worst single sample: 17.9 µg/L | 14/14 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 13.1 µg/L 22% of the EPA limit 60 µg/L
worst single sample: 14.4 µg/L | 14/14 | SYR4 | 2012–2019 |
| Bromodichloromethane | 4.37 µg/L No EPA limit set
worst single sample: 4.7 µg/L | 12/12 | SYR4 | 2014–2019 |
| Chloroform | 2.89 µg/L No EPA limit set
worst single sample: 3 µg/L | 12/12 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 8.535 µg/L No EPA limit set
worst single sample: 9.8 µg/L | 12/12 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 3.45 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 11/12 | SYR4 | 2014–2019 |
| Dibromochloromethane | 4.385 µg/L No EPA limit set
worst single sample: 4.7 µg/L | 10/12 | SYR4 | 2014–2019 |
| Bromoform | 20.4 µg/L No EPA limit set
worst single sample: 30 µg/L | 9/12 | SYR4 | 2014–2019 |
| Copper | 90.2 µg/L 6.9% of the EPA limit 1300 µg/L
worst single sample: 97 µg/L | 9/60 | SYR4 | 2012–2018 |
| Lead | 7.4 µg/L 49% of the EPA limit 15 µg/L
worst single sample: 8 µg/L | 5/60 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 5.97 µg/L No EPA limit set
worst single sample: 6.3 µg/L | 3/12 | SYR4 | 2014–2019 |
| Xylenes, Total | 1.28 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 1.3 µg/L | 3/21 | SYR4 | 2013–2019 |
| Fluoride | 529 µg/L 13% of the EPA limit 4000 µg/L
worst single sample: 530 µg/L | 2/2 | SYR4 | 2014–2017 |
| Lithium | 60.3 µg/L No EPA limit set | 2/2 | UCMR-5 | 2023 |
| Combined Radium (-226 And -228) | 1 pCi/L 20% of the EPA limit 5 pCi/L | 1/2 | SYR4 | 2013–2019 |
89 contaminants tested, none detected
Utility contact
Frequently asked questions about Plymouth Water
Is Plymouth Water tap water safe to drink?
EPA monitoring detected 16 contaminants in Plymouth Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Plymouth Water's water?
EPA monitoring detected Lead, TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Plymouth Water serve?
Plymouth Water reports serving 3,243 people in North Carolina, per its EPA record.
Has Plymouth Water had any water quality violations?
The EPA has 171 violations on file for Plymouth Water, of which 34 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.