Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-03-11 |
| TT | Health-based | Resolved | 2024-03-11 |
| TT | Health-based | Resolved | 2024-03-11 |
| TT | Health-based | Resolved | 2024-03-11 |
| TT | Health-based | Resolved | 2021-07-01 |
| TT | Health-based | Resolved | 2021-07-01 |
| TT | Health-based | Resolved | 2021-07-01 |
| TT | Health-based | Resolved | 2021-07-01 |
| TT | Health-based | Resolved | 2021-07-01 |
| TT | Health-based | Resolved | 2014-09-10 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 1520 µg/L 117% of the EPA limit, in the worst sample — 1300 µg/L | 213/259 | SYR4 | 2013–2019 |
| Lead | 88.91 µg/L 593% of the EPA limit, in the worst sample — 15 µg/L | 85/259 | SYR4 | 2013–2019 |
| Lead | 0.0040 mg/L 27% of the EPA limit 0.0150 mg/L | 34/34 | LCR | 2025 |
| TTHM | 17 µg/L 21% of the EPA limit 80 µg/L | 14/14 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 9 µg/L 15% of the EPA limit 60 µg/L | 13/13 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 5 µg/L No EPA limit set | 12/12 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 4 µg/L No EPA limit set | 12/12 | SYR4 | 2014–2019 |
| Chloroform | 9.47 µg/L No EPA limit set | 11/12 | SYR4 | 2014–2019 |
| Bromodichloromethane | 4.757 µg/L No EPA limit set | 10/12 | SYR4 | 2014–2019 |
| Fluoride | 2150 µg/L 54% of the EPA limit 4000 µg/L | 9/9 | SYR4 | 2013–2019 |
| Dibromochloromethane | 2.638 µg/L No EPA limit set | 6/12 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 2 µg/L No EPA limit set | 3/12 | SYR4 | 2014–2019 |
| Gross Beta Particle Activity | 14.6 pCi/L No EPA limit set | 2/2 | SYR4 | 2014–2015 |
| Xylenes, Total | 1.1 µg/L 0% of the EPA limit 10000 µg/L | 2/16 | SYR4 | 2012–2019 |
| Arsenic | 6 µg/L 60% of the EPA limit 10 µg/L | 1/9 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1 pCi/L 20% of the EPA limit 5 pCi/L | 1/6 | SYR4 | 2014–2016 |
| Heptachlor | 0.0946 µg/L 24% of the EPA limit 0.4000 µg/L | 1/20 | SYR4 | 2013–2019 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about Lauradale S/D
Is Lauradale S/D tap water safe to drink?
EPA monitoring detected 17 contaminants in Lauradale S/D's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Lauradale S/D's water?
EPA monitoring detected Copper, Lead, Lead, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Lauradale S/D serve?
Lauradale S/D reports serving 2,527 people in North Carolina, per its EPA record.
Has Lauradale S/D had any water quality violations?
The EPA has 1042 violations on file for Lauradale S/D, of which 32 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.