← North Carolina

Tap water quality report

Northampton--Milwaukee

EPA monitoring tested this supplier for 105 contaminants and detected 11. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

105
contaminants tested
11
detected
5,715
people served
10
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Northampton

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

10
health-based violations
214
violations on file
6
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
MCL Health-based Resolved 2003-11-01 → 2003-11-30
MCL Health-based Resolved 2003-11-01 → 2003-11-30
MCL Health-based Resolved 2003-11-01 → 2003-11-30
MCL Health-based Resolved 2003-11-01 → 2003-11-30
MCL Health-based Resolved 1994-08-01 → 1994-08-31
MCL Health-based Resolved 1994-08-01 → 1994-08-31
MCL Health-based Resolved 1994-08-01 → 1994-08-31
MCL Health-based Resolved 1994-08-01 → 1994-08-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Fluoride
606 µg/L 15%
of the EPA limit 4000 µg/L
worst single sample: 830 µg/L
15/15 SYR4 2013–2019
TTHM
23.9 µg/L 30%
of the EPA limit 80 µg/L
worst single sample: 26 µg/L
15/15 SYR4 2012–2019
Copper
229.95 µg/L 18%
of the EPA limit 1300 µg/L
worst single sample: 247 µg/L
12/40 SYR4 2014–2017
Total Haloacetic Acids (HAA5)
3.55 µg/L 5.9%
of the EPA limit 60 µg/L
worst single sample: 4 µg/L
10/16 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
9/9 LCR 2025
Bromodichloromethane
5.625 µg/L
No EPA limit set
worst single sample: 5.7 µg/L
6/6 SYR4 2014–2019
Chloroform
13.675 µg/L
No EPA limit set
worst single sample: 14 µg/L
6/6 SYR4 2014–2019
Dibromochloromethane
4 µg/L
No EPA limit set
6/6 SYR4 2014–2019
Dichloroacetic Acid
2.575 µg/L
No EPA limit set
worst single sample: 2.7 µg/L
6/6 SYR4 2014–2019
Nitrate
3340 µg/L 33%
of the EPA limit 10000 µg/L
2/78 SYR4 2012–2019
Trichloroacetic Acid
1.285 µg/L
No EPA limit set
worst single sample: 1.3 µg/L
2/6 SYR4 2014–2019
94 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBhc-GammaBariumBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined Radium (-226 And -228)Combined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoLeadMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
TURNER, REBECCA
Phone
252-534-6341
Email
becky.turner@nhcnc.net

Frequently asked questions about Northampton--Milwaukee

Is Northampton--Milwaukee tap water safe to drink?

EPA monitoring detected 11 contaminants in Northampton--Milwaukee's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Northampton--Milwaukee's water?

EPA monitoring detected Fluoride, TTHM, Copper, Total Haloacetic Acids (HAA5), Lead, and others. The full list with the level and data source for each is above.

How many people does Northampton--Milwaukee serve?

Northampton--Milwaukee reports serving 5,715 people in North Carolina, per its EPA record.

Has Northampton--Milwaukee had any water quality violations?

The EPA has 214 violations on file for Northampton--Milwaukee, of which 10 are health-based (a contaminant limit or required treatment was breached) and 6 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.