Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2019-02-01 → 2019-04-30 |
| MR | Monitoring | Resolved | 2019-02-01 → 2019-04-30 |
| MR | Monitoring | Resolved | 2019-02-01 → 2019-04-30 |
| MR | Monitoring | Resolved | 2019-02-01 → 2019-04-30 |
| MR | Monitoring | Resolved | 2019-02-01 → 2019-04-30 |
| MR | Monitoring | Resolved | 2019-02-01 → 2019-04-30 |
| MR | Monitoring | Resolved | 2019-02-01 → 2019-04-30 |
| MR | Monitoring | Resolved | 2019-02-01 → 2019-04-30 |
| MR | Monitoring | Resolved | 2019-02-01 → 2019-04-30 |
| MR | Monitoring | Resolved | 2009-10-01 → 2009-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 73 µg/L 91% of the EPA limit 80 µg/L | 28/28 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 121 µg/L 202% of the EPA limit, in the worst sample — 60 µg/L | 26/27 | SYR4 | 2012–2019 |
| Copper | 1390 µg/L 107% of the EPA limit, in the worst sample — 1300 µg/L | 25/40 | SYR4 | 2014–2017 |
| Bromodichloromethane | 12.23 µg/L No EPA limit set | 20/20 | SYR4 | 2014–2019 |
| Chloroform | 60.8 µg/L No EPA limit set | 20/20 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 63 µg/L No EPA limit set | 20/20 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 24 µg/L No EPA limit set | 20/20 | SYR4 | 2014–2019 |
| Fluoride | 862 µg/L 22% of the EPA limit 4000 µg/L | 16/17 | SYR4 | 2012–2019 |
| Lead | 0.00030 mg/L 2% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2028 |
| Dibromochloromethane | 3.161 µg/L No EPA limit set | 12/20 | SYR4 | 2014–2019 |
| Lead | 41 µg/L 273% of the EPA limit, in the worst sample — 15 µg/L | 9/40 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 3 µg/L No EPA limit set | 4/20 | SYR4 | 2014–2019 |
| Combined Radium (-226 And -228) | 1 pCi/L 20% of the EPA limit 5 pCi/L | 3/3 | SYR4 | 2015 |
| Monochloroacetic Acid | 7 µg/L No EPA limit set | 3/20 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 24 µg/L No EPA limit set | 1/20 | SYR4 | 2014–2019 |
| Xylenes, Total | 3 µg/L 0% of the EPA limit 10000 µg/L | 1/20 | SYR4 | 2012–2019 |
92 contaminants tested, none detected
Utility contact
Frequently asked questions about Chinquapin Water Association
Is Chinquapin Water Association tap water safe to drink?
EPA monitoring detected 16 contaminants in Chinquapin Water Association's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Chinquapin Water Association's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Copper, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Chinquapin Water Association serve?
Chinquapin Water Association reports serving 4,686 people in North Carolina, per its EPA record.
Has Chinquapin Water Association had any water quality violations?
The EPA has 143 violations on file for Chinquapin Water Association, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.