Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| RPT | Monitoring | Resolved | 2025-08-11 |
| RPT | Monitoring | Resolved | 2025-08-11 |
| RPT | Monitoring | Resolved | 2025-08-11 |
| RPT | Monitoring | Resolved | 2025-08-11 |
| RPT | Monitoring | Resolved | 2025-07-11 |
| RPT | Monitoring | Resolved | 2025-07-11 |
| RPT | Monitoring | Resolved | 2025-07-11 |
| RPT | Monitoring | Resolved | 2025-07-11 |
| MON | Monitoring | Resolved | 2024-03-01 → 2024-03-31 |
| MON | Monitoring | Resolved | 2024-03-01 → 2024-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 73.65 µg/L 92% of the EPA limit 80 µg/L
worst single sample: 74 µg/L | 8/8 | SYR4 | 2012–2019 |
| Copper | 1242.4 µg/L 96% of the EPA limit 1300 µg/L
worst single sample: 1630 µg/L | 7/49 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 34.82 µg/L 58% of the EPA limit 60 µg/L
worst single sample: 38 µg/L | 7/8 | SYR4 | 2012–2019 |
| Bromodichloromethane | 25 µg/L No EPA limit set
worst single sample: 26 µg/L | 6/6 | SYR4 | 2014–2019 |
| Chloroform | 38.5 µg/L No EPA limit set
worst single sample: 40 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dibromochloromethane | 11.875 µg/L No EPA limit set
worst single sample: 12 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 3.82 µg/L No EPA limit set
worst single sample: 4 µg/L | 5/6 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 12.64 µg/L No EPA limit set
worst single sample: 12.8 µg/L | 5/6 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 14.3 µg/L No EPA limit set
worst single sample: 15 µg/L | 5/6 | SYR4 | 2014–2019 |
| Lead | 212.6 µg/L 1417% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 245 µg/L | 4/49 | SYR4 | 2012–2019 |
| Fluoride | 200 µg/L 5% of the EPA limit 4000 µg/L | 3/3 | SYR4 | 2013–2018 |
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 3/3 | LCR | 2025 |
| Bromoform | 1 µg/L No EPA limit set | 1/6 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 7 µg/L No EPA limit set | 1/6 | SYR4 | 2014–2019 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Carolina Village Mhp
Is Carolina Village Mhp tap water safe to drink?
EPA monitoring detected 14 contaminants in Carolina Village Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Carolina Village Mhp's water?
EPA monitoring detected TTHM, Copper, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Carolina Village Mhp serve?
Carolina Village Mhp reports serving 305 people in North Carolina, per its EPA record.
Has Carolina Village Mhp had any water quality violations?
The EPA has 335 violations on file for Carolina Village Mhp, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.