Tap WaterIndex

← North Carolina

Tap water quality report

First Craven Sanitary District

EPA monitoring tested this supplier for 105 contaminants and detected 13. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

105
contaminants tested
13
detected
6,325
people served
2
health-based violations
North Carolina rankingsLead in North CarolinaPFAS in North Carolina
Water source
Ground water
Ownership
Local government
Counties served
Craven

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

2
health-based violations
7
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
RPT Monitoring Resolved 2024-10-17
RPT Monitoring Resolved 2024-10-17
Other Monitoring Resolved 2002-07-01
Other Monitoring Resolved 2002-07-01
Other Monitoring Resolved 2002-07-01

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
110 µg/L 138%
of the EPA limit, in the worst sample — 80 µg/L
 78/78 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
56.3 µg/L 94%
of the EPA limit 60 µg/L
 78/78 SYR4 2012–2019
Bromodichloromethane
19.1 µg/L
No EPA limit set
 50/50 SYR4 2013–2019
Chloroform
84.5 µg/L
No EPA limit set
 50/50 SYR4 2013–2019
Dibromochloromethane
3 µg/L
No EPA limit set
 50/50 SYR4 2013–2019
Dichloroacetic Acid
23.5 µg/L
No EPA limit set
 50/50 SYR4 2013–2019
Trichloroacetic Acid
30.7 µg/L
No EPA limit set
 50/50 SYR4 2013–2019
Copper
429 µg/L 33%
of the EPA limit 1300 µg/L
 33/40 SYR4 2014–2017
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 14/14 LCR 2025
Fluoride
380 µg/L 9.5%
of the EPA limit 4000 µg/L
 3/3 SYR4 2013–2019
Lead
29 µg/L 193%
of the EPA limit, in the worst sample — 15 µg/L
 3/40 SYR4 2014–2017
Monochloroacetic Acid
2.1 µg/L
No EPA limit set
 1/50 SYR4 2013–2019
Lithium
10.7 µg/L
No EPA limit set
 1/2 UCMR-5 2025
92 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBhc-GammaBariumBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined Radium (-226 And -228)Combined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNetfosaaNfdhaNmefosaaNitrateOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
RIGGS, EDWARD
Phone
252-633-6500
Email
firstcraven@embarqmail.com

Frequently asked questions about First Craven Sanitary District

Is First Craven Sanitary District tap water safe to drink?

EPA monitoring detected 13 contaminants in First Craven Sanitary District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in First Craven Sanitary District's water?

EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.

How many people does First Craven Sanitary District serve?

First Craven Sanitary District reports serving 6,325 people in North Carolina, per its EPA record.

Has First Craven Sanitary District had any water quality violations?

The EPA has 7 violations on file for First Craven Sanitary District, of which 2 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.