Tap WaterIndex

← North Carolina

Tap water quality report

Johnson & Son Mhp

EPA monitoring tested this supplier for 76 contaminants and detected 10. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

76
contaminants tested
10
detected
102
people served
13
health-based violations
North Carolina rankingsLead in North CarolinaPFAS in North Carolina
Water source
Ground water
Ownership
Private
Counties served
Wake

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

13
health-based violations
197
violations on file
2
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
MCL Health-based Resolved 1999-06-01 → 1999-06-30
MCL Health-based Resolved 1999-06-01 → 1999-06-30
MCL Health-based Resolved 1999-06-01 → 1999-06-30
MCL Health-based Resolved 1999-06-01 → 1999-06-30
MCL Health-based Archived 1983-06-24 → 1984-09-23
MCL Health-based Archived 1983-06-24 → 1984-09-23
MCL Health-based Archived 1983-06-24 → 1984-09-23
MCL Health-based Archived 1983-06-24 → 1984-09-23

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
2800 µg/L 28%
of the EPA limit 10000 µg/L
 16/16 SYR4 2012–2019
Copper
92.5 µg/L 7.1%
of the EPA limit 1300 µg/L
worst single sample: 94 µg/L
11/25 SYR4 2012–2019
Combined Uranium
20.1895 µg/L 67%
of the EPA limit 30 µg/L
worst single sample: 20.264 µg/L
3/3 SYR4 2013–2019
Fluoride
345 µg/L 8.6%
of the EPA limit 4000 µg/L
worst single sample: 350 µg/L
3/3 SYR4 2013–2019
Nitrate-Nitrite
2760 µg/L 28%
of the EPA limit 10000 µg/L
worst single sample: 2800 µg/L
3/3 SYR4 2013–2015
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 2/2 LCR 2025
Lead
4.95 µg/L 33%
of the EPA limit 15 µg/L
worst single sample: 5 µg/L
2/25 SYR4 2012–2019
Barium
18 µg/L 0.9%
of the EPA limit 2000 µg/L
 1/3 SYR4 2013–2019
Chloroform
1.1 µg/L
No EPA limit set
 1/3 SYR4 2013–2017
TTHM
1.1 µg/L 1.4%
of the EPA limit 80 µg/L
 1/3 SYR4 2013–2017
66 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromodichloromethaneBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDibromochloromethaneDichloroacetic AcidDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Haloacetic Acids (HAA5)Total Polychlorinated Biphenyls (PCB)ToxapheneTrichloroacetic AcidTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
JOHNSON, RACHEL
Email
rsoapoperamom@aol.com

Frequently asked questions about Johnson & Son Mhp

Is Johnson & Son Mhp tap water safe to drink?

EPA monitoring detected 10 contaminants in Johnson & Son Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Johnson & Son Mhp's water?

EPA monitoring detected Nitrate, Copper, Combined Uranium, Fluoride, Nitrate-Nitrite, and others. The full list with the level and data source for each is above.

How many people does Johnson & Son Mhp serve?

Johnson & Son Mhp reports serving 102 people in North Carolina, per its EPA record.

Has Johnson & Son Mhp had any water quality violations?

The EPA has 197 violations on file for Johnson & Son Mhp, of which 13 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.