Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Archived | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Archived | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Archived | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Archived | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Archived | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Archived | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Archived | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Archived | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Archived | 2024-10-01 → 2024-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate-Nitrite | 14900 µg/L 149% of the EPA limit, in the worst sample — 10000 µg/L | 66/66 | SYR4 | 2012–2019 |
| Copper | 1690 µg/L 130% of the EPA limit, in the worst sample — 1300 µg/L | 25/25 | SYR4 | 2014–2018 |
| Lead | 0.0040 mg/L 27% of the EPA limit 0.0150 mg/L | 22/22 | LCR | 2024 |
| Bromodichloromethane | 3.7 µg/L No EPA limit set | 3/5 | SYR4 | 2012–2018 |
| Bromoform | 3.4 µg/L No EPA limit set | 3/5 | SYR4 | 2012–2018 |
| Chloroform | 1.2 µg/L No EPA limit set | 3/5 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 4.3 µg/L No EPA limit set | 3/3 | SYR4 | 2012–2018 |
| Dibromochloromethane | 6.1 µg/L No EPA limit set | 3/5 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 1.4 µg/L No EPA limit set | 3/3 | SYR4 | 2012–2018 |
| Selenium | 4 µg/L 8% of the EPA limit 50 µg/L | 3/3 | SYR4 | 2012–2017 |
| TTHM | 14 µg/L 18% of the EPA limit 80 µg/L | 3/5 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 5.7 µg/L 9.5% of the EPA limit 60 µg/L | 3/3 | SYR4 | 2012–2018 |
| Arsenic | 6 µg/L 60% of the EPA limit 10 µg/L | 2/2 | SYR4 | 2014–2017 |
| Barium | 60 µg/L 3% of the EPA limit 2000 µg/L | 2/2 | SYR4 | 2014–2017 |
| Fluoride | 600 µg/L 15% of the EPA limit 4000 µg/L | 2/2 | SYR4 | 2014–2017 |
| Combined Uranium | 11 µg/L 37% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2014 |
| Gross Alpha, Excl. Radon And U | 3.4 pCi/L 23% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2014 |
| Lead | 2 µg/L 13% of the EPA limit 15 µg/L | 1/25 | SYR4 | 2014–2018 |
| Monochloroacetic Acid | 1.5 µg/L No EPA limit set | 1/3 | SYR4 | 2012–2018 |
53 contaminants tested, none detected
Utility contact
Frequently asked questions about Crystal Springs Water
Is Crystal Springs Water tap water safe to drink?
EPA monitoring detected 19 contaminants in Crystal Springs Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Crystal Springs Water's water?
EPA monitoring detected Nitrate-Nitrite, Copper, Lead, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Crystal Springs Water serve?
Crystal Springs Water reports serving 225 people in Montana, per its EPA record.
Has Crystal Springs Water had any water quality violations?
The EPA has 684 violations on file for Crystal Springs Water, of which 59 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.