Tap WaterIndex

← Texas

Tap water quality report

Hillside Village

EPA monitoring tested this supplier for 14 contaminants and detected 13. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

14
contaminants tested
13
detected
650
people served
0
health-based violations
Texas rankingsLead in TexasPFAS in Texas
Water source
SWP
Ownership
Private
Counties served
Yellowstone

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
141
violations on file
0
still open
ViolationTypeStatusPeriod
Other Monitoring Resolved 2025-10-01
Other Monitoring Resolved 2025-10-01
Other Monitoring Resolved 2025-07-01
Other Monitoring Resolved 2025-07-01
MR Monitoring Resolved 2024-12-30
MR Monitoring Resolved 2024-12-30
Other Monitoring Resolved 2022-07-01
Other Monitoring Resolved 2022-07-01
MR Monitoring Resolved 2021-12-30
MR Monitoring Resolved 2021-12-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
322 µg/L 25%
of the EPA limit 1300 µg/L
 30/30 SYR4 2014–2018
Lead
11 µg/L 73%
of the EPA limit 15 µg/L
 27/28 SYR4 2014–2018
Lead
0.0010 mg/L 6.7%
of the EPA limit 0.0150 mg/L
 26/26 LCR 2024
TTHM
67.8 µg/L 85%
of the EPA limit 80 µg/L
 22/22 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
77.4 µg/L 129%
of the EPA limit, in the worst sample — 60 µg/L
 22/22 SYR4 2013–2019
Chloroform
62.5 µg/L
No EPA limit set
 21/21 SYR4 2013–2019
Dichloroacetic Acid
31.1 µg/L
No EPA limit set
 21/22 SYR4 2013–2019
Trichloroacetic Acid
36.7 µg/L
No EPA limit set
 21/21 SYR4 2014–2019
Bromodichloromethane
10.6 µg/L
No EPA limit set
 20/21 SYR4 2013–2019
Monochloroacetic Acid
8.8 µg/L
No EPA limit set
 19/22 SYR4 2013–2019
Dibromochloromethane
5.3 µg/L
No EPA limit set
 10/22 SYR4 2013–2019
Dibromoacetic Acid
17.2 µg/L
No EPA limit set
 3/22 SYR4 2013–2019
Monobromoacetic Acid
1.4 µg/L
No EPA limit set
 2/22 SYR4 2013–2019
1 contaminants tested, none detected
Bromoform

Utility contact

Contact
QUINONES, RICARDO

Frequently asked questions about Hillside Village

Is Hillside Village tap water safe to drink?

EPA monitoring detected 13 contaminants in Hillside Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Hillside Village's water?

EPA monitoring detected Copper, Lead, Lead, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Hillside Village serve?

Hillside Village reports serving 650 people in Texas, per its EPA record.

Has Hillside Village had any water quality violations?

The EPA has 141 violations on file for Hillside Village, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.