Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2019-09-01 → 2022-08-31 |
| MR | Monitoring | Resolved | 2019-09-01 → 2022-08-31 |
| MR | Monitoring | Resolved | 2019-09-01 → 2022-08-31 |
| MR | Monitoring | Resolved | 2019-09-01 → 2022-08-31 |
| MR | Monitoring | Resolved | 2019-09-01 → 2022-08-31 |
| MR | Monitoring | Resolved | 2019-09-01 → 2022-08-31 |
| MR | Monitoring | Resolved | 2016-09-01 → 2019-08-31 |
| MR | Monitoring | Resolved | 2016-09-01 → 2019-08-31 |
| MR | Monitoring | Resolved | 2016-09-01 → 2019-08-31 |
| MR | Monitoring | Resolved | 2016-09-01 → 2019-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate-Nitrite | 3600 µg/L 36% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0060 mg/L 40% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2017 |
| Copper | 253.65 µg/L 20% of the EPA limit 1300 µg/L
worst single sample: 264 µg/L | 10/10 | SYR4 | 2014–2017 |
| Lead | 6.2 µg/L 41% of the EPA limit 15 µg/L
worst single sample: 9 µg/L | 9/10 | SYR4 | 2014–2017 |
| Bromoform | 4.77 µg/L No EPA limit set
worst single sample: 4.89 µg/L | 7/7 | SYR4 | 2013–2019 |
| Dibromochloromethane | 3.031 µg/L No EPA limit set
worst single sample: 3.07 µg/L | 7/7 | SYR4 | 2013–2019 |
| TTHM | 7.2315 µg/L 9% of the EPA limit 80 µg/L
worst single sample: 7.56 µg/L | 4/4 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 2.312 µg/L 3.9% of the EPA limit 60 µg/L
worst single sample: 2.42 µg/L | 4/4 | SYR4 | 2013–2019 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.231 µg/L No EPA limit set
worst single sample: 2.29 µg/L | 3/4 | SYR4 | 2013–2019 |
| Bromodichloromethane | 0.9151 µg/L No EPA limit set
worst single sample: 0.9190 µg/L | 2/7 | SYR4 | 2013–2019 |
| Combined Uranium | 12.75 µg/L 43% of the EPA limit 30 µg/L
worst single sample: 13 µg/L | 2/2 | SYR4 | 2016–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Saddle Mountain Corp Clancy
Is Saddle Mountain Corp Clancy tap water safe to drink?
EPA monitoring detected 12 contaminants in Saddle Mountain Corp Clancy's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Saddle Mountain Corp Clancy's water?
EPA monitoring detected Nitrate-Nitrite, Lead, Copper, Lead, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Saddle Mountain Corp Clancy serve?
Saddle Mountain Corp Clancy reports serving 350 people in Montana, per its EPA record.
Has Saddle Mountain Corp Clancy had any water quality violations?
The EPA has 55 violations on file for Saddle Mountain Corp Clancy, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.