Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2025-07-01 → 2025-07-31 |
| TT | Health-based | Resolved | 2025-07-01 → 2025-07-31 |
| TT | Health-based | Resolved | 2025-07-01 → 2025-07-31 |
| TT | Health-based | Resolved | 2025-07-01 → 2025-07-31 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-07-31 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-07-31 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-07-31 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-07-31 |
| MCL | Health-based | Resolved | 2008-09-01 → 2008-09-30 |
| MCL | Health-based | Resolved | 2008-09-01 → 2008-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 62.9 µg/L 4.8% of the EPA limit 1300 µg/L | 64/64 | SYR4 | 2012–2019 |
| Bromodichloromethane | 22.6 µg/L No EPA limit set | 45/45 | SYR4 | 2012–2019 |
| Bromoform | 17.3 µg/L No EPA limit set | 45/45 | SYR4 | 2012–2019 |
| Chloroform | 11.2 µg/L No EPA limit set | 45/45 | SYR4 | 2012–2019 |
| Dibromochloromethane | 31.3 µg/L No EPA limit set | 45/45 | SYR4 | 2012–2019 |
| TTHM | 80.6 µg/L 101% of the EPA limit, in the worst sample — 80 µg/L | 42/42 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 8.22 µg/L No EPA limit set | 41/42 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 7.9 µg/L No EPA limit set | 40/42 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 2.4 µg/L No EPA limit set | 31/42 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 27/27 | LCR | 2024 |
| Total Haloacetic Acids (HAA5) | 26.2 µg/L 44% of the EPA limit 60 µg/L | 23/42 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 1940 µg/L 19% of the EPA limit 10000 µg/L | 18/18 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 14.8 µg/L No EPA limit set | 14/42 | SYR4 | 2012–2019 |
| Lead | 11.8 µg/L 79% of the EPA limit 15 µg/L | 13/64 | SYR4 | 2012–2019 |
| Barium | 187 µg/L 9.4% of the EPA limit 2000 µg/L | 4/4 | SYR4 | 2012–2019 |
| Fluoride | 160 µg/L 4% of the EPA limit 4000 µg/L | 4/4 | SYR4 | 2012–2019 |
| Chromium | 7.14 µg/L 7.1% of the EPA limit 100 µg/L | 2/4 | SYR4 | 2012–2019 |
| Lithium | 19.4 µg/L No EPA limit set | 2/2 | UCMR-5 | 2025 |
| Mercury | 0.3500 µg/L 18% of the EPA limit 2 µg/L | 1/4 | SYR4 | 2012–2019 |
| Xylenes, Total | 0.5200 µg/L 0% of the EPA limit 10000 µg/L | 1/3 | SYR4 | 2012–2019 |
79 contaminants tested, none detected
Utility contact
Frequently asked questions about Ste Genevieve
Is Ste Genevieve tap water safe to drink?
EPA monitoring detected 20 contaminants in Ste Genevieve's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Ste Genevieve's water?
EPA monitoring detected Copper, Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Ste Genevieve serve?
Ste Genevieve reports serving 4,999 people in Missouri, per its EPA record.
Has Ste Genevieve had any water quality violations?
The EPA has 45 violations on file for Ste Genevieve, of which 16 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.