← Missouri

Tap water quality report

Higginsville

EPA monitoring tested this supplier for 99 contaminants and detected 23. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

99
contaminants tested
23
detected
4,800
people served
10
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Lafayette

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

10
health-based violations
35
violations on file
2
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 1994-01-01 → 1994-12-31
MCL Health-based Resolved 1994-01-01 → 1994-12-31
MCL Health-based Resolved 1994-01-01 → 1994-12-31
MCL Health-based Resolved 1994-01-01 → 1994-12-31
MCL Health-based Archived 1983-01-01 → 1983-12-31
MCL Health-based Archived 1983-01-01 → 1983-12-31
MCL Health-based Archived 1983-01-01 → 1983-12-31
MCL Health-based Archived 1983-01-01 → 1983-12-31
MCL Health-based Archived 1983-01-01 → 1983-12-31
MCL Health-based Archived 1983-01-01 → 1983-12-31

PFAS detected

PFAS are industrial “forever chemicals”. These are the EPA's latest nationwide test results (2023–2025).
ContaminantMaxDetection ratePeriod
Pfba 0.0090 µg/L 2/4 2024

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Chlorite
890 µg/L 89%
of the EPA limit 1000 µg/L
288/288 SYR4 2012–2019
Bromodichloromethane
26.9 µg/L
No EPA limit set
88/88 SYR4 2012–2019
Chloroform
83.3 µg/L
No EPA limit set
88/88 SYR4 2012–2019
Dibromochloromethane
11.8 µg/L
No EPA limit set
87/88 SYR4 2012–2019
TTHM
111 µg/L 139%
of the EPA limit, in the worst sample — 80 µg/L
80/80 SYR4 2012–2019
Dichloroacetic Acid
27.6 µg/L
No EPA limit set
79/79 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
45 µg/L 75%
of the EPA limit 60 µg/L
79/79 SYR4 2012–2019
Trichloroacetic Acid
13.2 µg/L
No EPA limit set
79/79 SYR4 2012–2019
Copper
261 µg/L 20%
of the EPA limit 1300 µg/L
68/68 SYR4 2012–2019
Dibromoacetic Acid
3.97 µg/L
No EPA limit set
52/79 SYR4 2012–2019
Bromoform
1.29 µg/L
No EPA limit set
32/88 SYR4 2012–2019
Monobromoacetic Acid
13.9 µg/L
No EPA limit set
23/79 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
21/21 LCR 2025
Atrazine
1.16 µg/L 39%
of the EPA limit 3 µg/L
16/32 SYR4 2012–2019
Nitrate-Nitrite
1670 µg/L 17%
of the EPA limit 10000 µg/L
16/16 SYR4 2012–2019
Lead
28.1 µg/L 187%
of the EPA limit, in the worst sample — 15 µg/L
14/68 SYR4 2012–2019
Barium
97.7 µg/L 4.9%
of the EPA limit 2000 µg/L
8/8 SYR4 2012–2019
Fluoride
960 µg/L 24%
of the EPA limit 4000 µg/L
8/8 SYR4 2012–2019
Arsenic
1.41 µg/L 14%
of the EPA limit 10 µg/L
4/8 SYR4 2012–2019
Chromium
3.59 µg/L 3.6%
of the EPA limit 100 µg/L
3/8 SYR4 2012–2019
Monochloroacetic Acid
7.7 µg/L
No EPA limit set
1/79 SYR4 2012–2019
Simazine
0.6500 µg/L 16%
of the EPA limit 4 µg/L
1/32 SYR4 2012–2019
76 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalBhc-GammaBenzeneBeryllium, TotalChlorobenzeneCadmiumCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDinosebEthylene DibromideEndrinEthylbenzeneHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumStyreneTetrachloroethyleneThallium, TotalTolueneToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
BARKER, LEE
Phone
660-584-2106
Email
watertreatment@ctcis.net

Frequently asked questions about Higginsville

Is Higginsville tap water safe to drink?

EPA monitoring detected 23 contaminants in Higginsville's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Higginsville's water?

EPA monitoring detected Chlorite, Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.

How many people does Higginsville serve?

Higginsville reports serving 4,800 people in Missouri, per its EPA record.

Has Higginsville had any water quality violations?

The EPA has 35 violations on file for Higginsville, of which 10 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.