Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2006-01-23 → 2008-07-15 |
| MCL | Health-based | Resolved | 2006-01-23 → 2008-07-15 |
| MCL | Health-based | Resolved | 2006-01-23 → 2008-07-15 |
| MCL | Health-based | Resolved | 2006-01-23 → 2008-07-15 |
| MCL | Health-based | Resolved | 2006-01-23 → 2008-07-15 |
| MCL | Health-based | Resolved | 2006-01-23 → 2008-07-15 |
| MCL | Health-based | Resolved | 2006-01-23 → 2008-07-15 |
| MCL | Health-based | Resolved | 2006-01-23 → 2008-07-15 |
| MCL | Health-based | Resolved | 2006-01-23 → 2008-07-15 |
| MCL | Health-based | Resolved | 2005-02-15 → 2005-04-20 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfba | 0.0252 µg/L | 5/15 | 2025 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 61 µg/L No EPA limit set | 64/71 | SYR4 | 2012–2019 |
| Bromodichloromethane | 11 µg/L No EPA limit set | 61/68 | SYR4 | 2012–2019 |
| Copper | 987 µg/L 76% of the EPA limit 1300 µg/L | 60/60 | SYR4 | 2014–2017 |
| Dichloroacetic Acid | 35 µg/L No EPA limit set | 45/46 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 22 µg/L No EPA limit set | 43/46 | SYR4 | 2012–2019 |
| Fluoride | 1300 µg/L 33% of the EPA limit 4000 µg/L | 29/31 | SYR4 | 2012–2019 |
| Lead | 11.6 µg/L 77% of the EPA limit 15 µg/L | 29/60 | SYR4 | 2014–2017 |
| Dibromochloromethane | 2.4 µg/L No EPA limit set | 26/63 | SYR4 | 2012–2019 |
| Arsenic | 9.76 µg/L 98% of the EPA limit 10 µg/L | 24/46 | SYR4 | 2012–2019 |
| Lead | 0.0034 mg/L 23% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2023 |
| 1,2-Dichloroethane | 1.7 µg/L 34% of the EPA limit 5 µg/L | 16/32 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 260 µg/L 2.6% of the EPA limit 10000 µg/L | 10/190 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 14 pCi/L 93% of the EPA limit 15 pCi/L | 9/18 | SYR4 | 2012–2018 |
| Barium | 118 µg/L 5.9% of the EPA limit 2000 µg/L | 8/9 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 5.5 µg/L No EPA limit set | 6/46 | SYR4 | 2012–2019 |
| Cyanide | 110 µg/L 55% of the EPA limit 200 µg/L | 2/9 | SYR4 | 2012–2018 |
| Chromium | 0.2700 µg/L 0.3% of the EPA limit 100 µg/L | 2/21 | SYR4 | 2012–2018 |
| Di(2-ethylhexyl) Phthalate | 2.7 µg/L 45% of the EPA limit 6 µg/L | 1/20 | SYR4 | 2012–2019 |
| Lithium | 11.8 µg/L No EPA limit set | 1/17 | UCMR-5 | 2025 |
81 contaminants tested, none detected
Utility contact
Frequently asked questions about Blaine
Is Blaine tap water safe to drink?
EPA monitoring detected 20 contaminants in Blaine's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Blaine's water?
EPA monitoring detected Chloroform, Bromodichloromethane, Copper, Dichloroacetic Acid, Trichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Blaine serve?
Blaine reports serving 70,220 people in Minnesota, per its EPA record.
Has Blaine had any water quality violations?
The EPA has 18 violations on file for Blaine, of which 18 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.