Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2013-01-01 → 2013-03-31 |
| MR | Monitoring | Resolved | 2013-01-01 → 2013-03-31 |
| MR | Monitoring | Resolved | 2013-01-01 → 2013-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 7665 µg/L 77% of the EPA limit 10000 µg/L
worst single sample: 7700 µg/L | 28/28 | SYR4 | 2012–2015 |
| Nitrate-Nitrite | 7880 µg/L 79% of the EPA limit 10000 µg/L
worst single sample: 8600 µg/L | 19/19 | SYR4 | 2015–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2014 |
| Bromodichloromethane | 9.24 µg/L No EPA limit set
worst single sample: 9.3 µg/L | 5/5 | SYR4 | 2012–2019 |
| Chloroform | 25.68 µg/L No EPA limit set
worst single sample: 26.1 µg/L | 5/5 | SYR4 | 2012–2019 |
| Dibromochloromethane | 4.56 µg/L No EPA limit set
worst single sample: 4.7 µg/L | 5/5 | SYR4 | 2012–2019 |
| Bromoform | 1.152 µg/L No EPA limit set
worst single sample: 1.2 µg/L | 3/5 | SYR4 | 2012–2019 |
| Fluoride | 605 µg/L 15% of the EPA limit 4000 µg/L
worst single sample: 610 µg/L | 3/3 | SYR4 | 2014–2017 |
| TTHM | 35.8 µg/L 45% of the EPA limit 80 µg/L
worst single sample: 36.2 µg/L | 3/3 | SYR4 | 2013–2017 |
| Total Haloacetic Acids (HAA5) | 8.82 µg/L 15% of the EPA limit 60 µg/L
worst single sample: 8.9 µg/L | 3/3 | SYR4 | 2013–2017 |
| Barium | 190 µg/L 9.5% of the EPA limit 2000 µg/L
worst single sample: 197 µg/L | 2/3 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 1.4 µg/L No EPA limit set | 2/2 | SYR4 | 2013–2014 |
| Dichloroacetic Acid | 5.2 µg/L No EPA limit set | 2/2 | SYR4 | 2013–2014 |
| Trichloroacetic Acid | 1.48 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 2/2 | SYR4 | 2013–2014 |
57 contaminants tested, none detected
Utility contact
Frequently asked questions about Bradford Estates
Is Bradford Estates tap water safe to drink?
EPA monitoring detected 14 contaminants in Bradford Estates's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bradford Estates's water?
EPA monitoring detected Nitrate, Nitrate-Nitrite, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Bradford Estates serve?
Bradford Estates reports serving 178 people in Maryland, per its EPA record.
Has Bradford Estates had any water quality violations?
The EPA has 3 violations on file for Bradford Estates, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.