Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2025-03-01 → 2025-03-31 |
| MON | Monitoring | Resolved | 2025-03-01 → 2025-03-31 |
| MON | Monitoring | Resolved | 2025-03-01 → 2025-03-31 |
| MON | Monitoring | Resolved | 2019-12-01 → 2019-12-31 |
| MON | Monitoring | Resolved | 2019-12-01 → 2019-12-31 |
| MON | Monitoring | Resolved | 2019-12-01 → 2019-12-31 |
| MON | Monitoring | Resolved | 2019-12-01 → 2019-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Bromodichloromethane | 17.278 µg/L No EPA limit set
worst single sample: 17.3 µg/L | 11/11 | SYR4 | 2012–2019 |
| Chloroform | 26.295 µg/L No EPA limit set
worst single sample: 26.3 µg/L | 11/11 | SYR4 | 2012–2019 |
| Dibromochloromethane | 8.8 µg/L No EPA limit set | 11/11 | SYR4 | 2012–2019 |
| Nitrate | 160 µg/L 1.6% of the EPA limit 10000 µg/L | 8/18 | SYR4 | 2012–2019 |
| TTHM | 49.9642 µg/L 62% of the EPA limit 80 µg/L
worst single sample: 54.106 µg/L | 7/7 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 10.05 µg/L 17% of the EPA limit 60 µg/L
worst single sample: 10.2 µg/L | 7/7 | SYR4 | 2012–2019 |
| Bromoform | 1.792 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 5/10 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 1.069 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 3/3 | SYR4 | 2012–2015 |
| Dichloroacetic Acid | 6.366 µg/L No EPA limit set
worst single sample: 6.4 µg/L | 3/3 | SYR4 | 2012–2015 |
| Trichloroacetic Acid | 2.63 µg/L No EPA limit set
worst single sample: 2.7 µg/L | 3/3 | SYR4 | 2012–2015 |
| Fluoride | 110 µg/L 2.8% of the EPA limit 4000 µg/L | 1/3 | SYR4 | 2014–2017 |
| Gross Beta Particle Activity | 4.1 pCi/L No EPA limit set | 1/1 | SYR4 | 2014 |
| Xylenes, Total | 2.19 µg/L 0% of the EPA limit 10000 µg/L | 1/8 | SYR4 | 2012–2019 |
58 contaminants tested, none detected
Utility contact
Frequently asked questions about Phoenix
Is Phoenix tap water safe to drink?
EPA monitoring detected 14 contaminants in Phoenix's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Phoenix's water?
EPA monitoring detected Lead, Bromodichloromethane, Chloroform, Dibromochloromethane, Nitrate, and others. The full list with the level and data source for each is above.
How many people does Phoenix serve?
Phoenix reports serving 31 people in Maryland, per its EPA record.
Has Phoenix had any water quality violations?
The EPA has 7 violations on file for Phoenix, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.