Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1996-08-15 → 1996-09-14 |
| MCL | Health-based | Archived | 1996-08-15 → 1996-09-14 |
| MCL | Health-based | Archived | 1996-08-15 → 1996-09-14 |
| MCL | Health-based | Archived | 1993-06-15 → 1993-07-14 |
| MCL | Health-based | Archived | 1993-06-15 → 1993-07-14 |
| MCL | Health-based | Archived | 1993-06-15 → 1993-07-14 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 7.66 µg/L No EPA limit set
worst single sample: 10 µg/L | 14/14 | SYR4 | 2013–2019 |
| TTHM | 36.35 µg/L 45% of the EPA limit 80 µg/L
worst single sample: 42.2 µg/L | 14/14 | SYR4 | 2013–2019 |
| Bromodichloromethane | 12.635 µg/L No EPA limit set
worst single sample: 15 µg/L | 12/14 | SYR4 | 2013–2019 |
| Bromoform | 7.5 µg/L No EPA limit set
worst single sample: 8.9 µg/L | 11/14 | SYR4 | 2013–2019 |
| Dibromochloromethane | 13.505 µg/L No EPA limit set
worst single sample: 14 µg/L | 10/14 | SYR4 | 2013–2019 |
| Copper | 300 µg/L 23% of the EPA limit 1300 µg/L | 9/23 | SYR4 | 2014–2017 |
| Dichloroacetic Acid | 3.4 µg/L No EPA limit set | 9/14 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 12.58 µg/L 21% of the EPA limit 60 µg/L
worst single sample: 14.1 µg/L | 9/14 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 4.03 µg/L No EPA limit set
worst single sample: 4.1 µg/L | 8/14 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2023 |
| Trichloroacetic Acid | 3.22 µg/L No EPA limit set
worst single sample: 3.7 µg/L | 7/14 | SYR4 | 2013–2019 |
| Fluoride | 180 µg/L 4.5% of the EPA limit 4000 µg/L | 6/6 | SYR4 | 2014–2017 |
| Lead | 1.75 µg/L 12% of the EPA limit 15 µg/L
worst single sample: 2 µg/L | 6/23 | SYR4 | 2014–2017 |
| Dalapon | 1.67 µg/L 0.8% of the EPA limit 200 µg/L | 3/6 | SYR4 | 2014–2017 |
| Monochloroacetic Acid | 4.21 µg/L No EPA limit set
worst single sample: 4.5 µg/L | 3/14 | SYR4 | 2013–2019 |
| Barium | 6.4 µg/L 0.3% of the EPA limit 2000 µg/L | 1/6 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 0.5610 pCi/L 11% of the EPA limit 5 pCi/L | 1/3 | SYR4 | 2017 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about Gil-Gal Water
Is Gil-Gal Water tap water safe to drink?
EPA monitoring detected 17 contaminants in Gil-Gal Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Gil-Gal Water's water?
EPA monitoring detected Chloroform, TTHM, Bromodichloromethane, Bromoform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Gil-Gal Water serve?
Gil-Gal Water reports serving 1,551 people in Louisiana, per its EPA record.
Has Gil-Gal Water had any water quality violations?
The EPA has 6 violations on file for Gil-Gal Water, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.