Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Addressed | 2020-09-23 |
| TT | Health-based | Addressed | 2020-09-23 |
| TT | Health-based | Addressed | 2020-09-23 |
| TT | Health-based | Addressed | 2020-09-23 |
| TT | Health-based | Addressed | 2020-09-23 |
| TT | Health-based | Addressed | 2020-09-23 |
| TT | Health-based | Addressed | 2020-09-23 |
| TT | Health-based | Addressed | 2020-09-23 |
| TT | Health-based | Addressed | 2020-09-23 |
| TT | Health-based | Addressed | 2020-09-23 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 3.1 µg/L 21% of the EPA limit 15 µg/L
worst single sample: 5 µg/L | 20/24 | SYR4 | 2013–2018 |
| Copper | 870 µg/L 67% of the EPA limit 1300 µg/L
worst single sample: 1000 µg/L | 14/24 | SYR4 | 2013–2018 |
| Chloroform | 2.46 µg/L No EPA limit set
worst single sample: 2.7 µg/L | 9/10 | SYR4 | 2013–2019 |
| TTHM | 28.36 µg/L 35% of the EPA limit 80 µg/L
worst single sample: 30.6 µg/L | 9/10 | SYR4 | 2013–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 8/8 | LCR | 2024 |
| Bromodichloromethane | 5.65 µg/L No EPA limit set
worst single sample: 6.3 µg/L | 6/10 | SYR4 | 2013–2019 |
| Bromoform | 11.725 µg/L No EPA limit set
worst single sample: 13 µg/L | 6/10 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 3.2 µg/L No EPA limit set
worst single sample: 3.3 µg/L | 6/10 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 5.275 µg/L 8.8% of the EPA limit 60 µg/L
worst single sample: 5.5 µg/L | 6/10 | SYR4 | 2013–2019 |
| Barium | 54 µg/L 2.7% of the EPA limit 2000 µg/L | 4/4 | SYR4 | 2015–2018 |
| Dibromochloromethane | 11.765 µg/L No EPA limit set
worst single sample: 11.9 µg/L | 4/10 | SYR4 | 2013–2019 |
| Fluoride | 210 µg/L 5.3% of the EPA limit 4000 µg/L | 4/4 | SYR4 | 2015–2018 |
| Trichloroacetic Acid | 1.67 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 4/10 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 2.232 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 2/10 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 37 µg/L 0.4% of the EPA limit 10000 µg/L | 2/22 | SYR4 | 2012–2019 |
| Oxamyl | 1.8 µg/L 0.9% of the EPA limit 200 µg/L | 1/4 | SYR4 | 2015–2018 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about Town of Cotton Valley Water
Is Town of Cotton Valley Water tap water safe to drink?
EPA monitoring detected 16 contaminants in Town of Cotton Valley Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Town of Cotton Valley Water's water?
EPA monitoring detected Lead, Copper, Chloroform, TTHM, Lead, and others. The full list with the level and data source for each is above.
How many people does Town of Cotton Valley Water serve?
Town of Cotton Valley Water reports serving 1,380 people in Louisiana, per its EPA record.
Has Town of Cotton Valley Water had any water quality violations?
The EPA has 237 violations on file for Town of Cotton Valley Water, of which 42 are health-based (a contaminant limit or required treatment was breached) and 26 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.