Is Linville-Haile Water Tap Water Safe? Quality Report

Water source: Ground water
Ownership: Private
Counties served: Union Parish

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

564

health-based violations

672

violations on file

still open

Violation	Type	Status	Period
MCL	Health-based	Archived	2026-01-01 → 2026-03-31
MCL	Health-based	Archived	2026-01-01 → 2026-03-31
MCL	Health-based	Archived	2026-01-01 → 2026-03-31
MCL	Health-based	Archived	2025-10-01 → 2025-12-31
MCL	Health-based	Archived	2025-10-01 → 2025-12-31
MCL	Health-based	Archived	2025-10-01 → 2025-12-31
MCL	Health-based	Archived	2025-10-01 → 2025-12-31
MCL	Health-based	Archived	2025-10-01 → 2025-12-31
MCL	Health-based	Archived	2025-10-01 → 2025-12-31
MCL	Health-based	Archived	2025-07-01 → 2025-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.

Contaminant	Level vs EPA limit	Detection rate	Source	Period
Bromoform	235.45 µg/L No EPA limit set worst single sample: 271 µg/L	54/56	SYR4	2012–2019
Dibromochloromethane	93.345 µg/L No EPA limit set worst single sample: 110 µg/L	54/56	SYR4	2012–2019
TTHM	340.09 µg/L 425% of the EPA limit, at the 95th percentile of samples — 80 µg/L worst single sample: 401.4 µg/L	54/56	SYR4	2012–2019
Bromodichloromethane	22.56 µg/L No EPA limit set worst single sample: 26.5 µg/L	53/56	SYR4	2012–2019
Chloroform	8.14 µg/L No EPA limit set worst single sample: 9.9 µg/L	53/56	SYR4	2012–2019
Total Haloacetic Acids (HAA5)	59.655 µg/L 99% of the EPA limit 60 µg/L worst single sample: 75 µg/L	52/56	SYR4	2012–2019
Dibromoacetic Acid	47.45 µg/L No EPA limit set worst single sample: 58.1 µg/L	51/56	SYR4	2012–2019
Trichloroacetic Acid	4.7 µg/L No EPA limit set worst single sample: 5.1 µg/L	35/56	SYR4	2012–2019
Monobromoacetic Acid	10.835 µg/L No EPA limit set worst single sample: 16.7 µg/L	30/56	SYR4	2012–2019
Dichloroacetic Acid	6.44 µg/L No EPA limit set worst single sample: 7.9 µg/L	29/56	SYR4	2012–2019
Lead	2.9 µg/L 19% of the EPA limit 15 µg/L worst single sample: 4.6 µg/L	23/36	SYR4	2013–2019
Copper	500 µg/L 38% of the EPA limit 1300 µg/L	13/36	SYR4	2013–2019
Fluoride	500 µg/L 13% of the EPA limit 4000 µg/L	9/9	SYR4	2012–2018
Lead	0.0024 mg/L 16% of the EPA limit 0.0150 mg/L	9/9	LCR	2025
Barium	22.25 µg/L 1.1% of the EPA limit 2000 µg/L worst single sample: 23 µg/L	6/9	SYR4	2012–2018
Di(2-ethylhexyl) Phthalate	0.7935 µg/L 13% of the EPA limit 6 µg/L worst single sample: 0.8400 µg/L	4/9	SYR4	2012–2018
Monochloroacetic Acid	5.61 µg/L No EPA limit set worst single sample: 5.7 µg/L	4/56	SYR4	2012–2019
Arsenic	1 µg/L 10% of the EPA limit 10 µg/L	3/9	SYR4	2012–2018
Combined Radium (-226 And -228)	1.4837 pCi/L 30% of the EPA limit 5 pCi/L worst single sample: 1.52 pCi/L	2/3	SYR4	2018
Nitrate-Nitrite	44 µg/L 0.4% of the EPA limit 10000 µg/L	2/48	SYR4	2012–2019
Gross Beta Particle Activity	1.42 pCi/L No EPA limit set	1/9	SYR4	2012–2018

59 contaminants tested, none detected

1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateGross Alpha, Excl. Radon And UHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact: HARRELL, KEN
Phone: 318-292-4121
Email: linvillehailewatersystem@yahoo.com

Frequently asked questions about Linville-Haile Water

Is Linville-Haile Water tap water safe to drink?

EPA monitoring detected 21 contaminants in Linville-Haile Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Linville-Haile Water's water?

EPA monitoring detected Bromoform, Dibromochloromethane, TTHM, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.

How many people does Linville-Haile Water serve?

Linville-Haile Water reports serving 1,635 people in Louisiana, per its EPA record.

Has Linville-Haile Water had any water quality violations?

The EPA has 672 violations on file for Linville-Haile Water, of which 564 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.