Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2019-04-17 |
| TT | Health-based | Resolved | 2019-04-17 |
| TT | Health-based | Resolved | 2019-04-17 |
| TT | Health-based | Resolved | 2019-04-17 |
| TT | Health-based | Resolved | 2019-04-17 |
| TT | Health-based | Resolved | 2019-04-17 |
| TT | Health-based | Resolved | 2019-04-17 |
| TT | Health-based | Resolved | 2019-04-17 |
| TT | Health-based | Resolved | 2019-04-17 |
| TT | Health-based | Resolved | 2019-04-17 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 600 µg/L 46% of the EPA limit 1300 µg/L | 47/64 | SYR4 | 2013–2019 |
| Lead | 20 µg/L 133% of the EPA limit, in the worst sample — 15 µg/L | 44/64 | SYR4 | 2013–2019 |
| Bromodichloromethane | 6.1 µg/L No EPA limit set | 14/14 | SYR4 | 2013–2019 |
| Chloroform | 3.4 µg/L No EPA limit set | 14/14 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.9 µg/L No EPA limit set | 14/14 | SYR4 | 2013–2019 |
| Dibromochloromethane | 6 µg/L No EPA limit set | 14/14 | SYR4 | 2013–2019 |
| TTHM | 16.4 µg/L 21% of the EPA limit 80 µg/L | 14/14 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 4.8 µg/L 8% of the EPA limit 60 µg/L | 14/14 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 1.7 µg/L No EPA limit set | 13/14 | SYR4 | 2013–2019 |
| Bromoform | 2.3 µg/L No EPA limit set | 9/14 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.8 µg/L No EPA limit set | 9/14 | SYR4 | 2013–2019 |
| Lead | 0.00092 mg/L 6.1% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2025 |
| Fluoride | 240 µg/L 6% of the EPA limit 4000 µg/L | 6/6 | SYR4 | 2012–2017 |
| Barium | 220 µg/L 11% of the EPA limit 2000 µg/L | 2/6 | SYR4 | 2012–2017 |
| Combined Radium (-226 And -228) | 1.163 pCi/L 23% of the EPA limit 5 pCi/L | 2/2 | SYR4 | 2017 |
| Di(2-ethylhexyl) Phthalate | 1.45 µg/L 24% of the EPA limit 6 µg/L | 2/6 | SYR4 | 2012–2017 |
| Monobromoacetic Acid | 0.3380 µg/L No EPA limit set | 1/14 | SYR4 | 2013–2019 |
93 contaminants tested, none detected
Utility contact
Frequently asked questions about St Landry Water Works District 2 Rural
Is St Landry Water Works District 2 Rural tap water safe to drink?
EPA monitoring detected 17 contaminants in St Landry Water Works District 2 Rural's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in St Landry Water Works District 2 Rural's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Chloroform, Dibromoacetic Acid, and others. The full list with the level and data source for each is above.
How many people does St Landry Water Works District 2 Rural serve?
St Landry Water Works District 2 Rural reports serving 4,761 people in Louisiana, per its EPA record.
Has St Landry Water Works District 2 Rural had any water quality violations?
The EPA has 30 violations on file for St Landry Water Works District 2 Rural, of which 19 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.