Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2022-08-03 |
| TT | Health-based | Resolved | 2022-08-03 |
| TT | Health-based | Resolved | 2022-08-03 |
| TT | Health-based | Resolved | 2022-08-03 |
| TT | Health-based | Resolved | 2022-08-03 |
| TT | Health-based | Resolved | 2022-08-03 |
| TT | Health-based | Resolved | 2022-08-03 |
| TT | Health-based | Resolved | 2022-08-03 |
| TT | Health-based | Resolved | 2022-08-03 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 68.2 µg/L No EPA limit set | 36/36 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 36.9 µg/L No EPA limit set | 36/36 | SYR4 | 2014–2019 |
| TTHM | 99 µg/L 124% of the EPA limit, in the worst sample — 80 µg/L | 36/36 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 59.2 µg/L 99% of the EPA limit 60 µg/L | 36/36 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 28.6 µg/L No EPA limit set | 36/36 | SYR4 | 2014–2019 |
| Bromodichloromethane | 24.1 µg/L No EPA limit set | 34/36 | SYR4 | 2014–2019 |
| Dibromochloromethane | 18.1 µg/L No EPA limit set | 33/36 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 3.1 µg/L No EPA limit set | 21/36 | SYR4 | 2014–2019 |
| Lead | 9.2 µg/L 61% of the EPA limit 15 µg/L | 12/19 | SYR4 | 2012–2019 |
| Copper | 100 µg/L 7.7% of the EPA limit 1300 µg/L | 8/19 | SYR4 | 2012–2019 |
| Fluoride | 400 µg/L 10% of the EPA limit 4000 µg/L | 6/6 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 6/6 | LCR | 2024 |
| Barium | 7.5 µg/L 0.4% of the EPA limit 2000 µg/L | 3/6 | SYR4 | 2013–2019 |
| Bromoform | 5.6 µg/L No EPA limit set | 2/36 | SYR4 | 2014–2019 |
| Di(2-ethylhexyl) Phthalate | 1.24 µg/L 21% of the EPA limit 6 µg/L | 2/6 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 2.6 µg/L No EPA limit set | 2/36 | SYR4 | 2014–2019 |
| Combined Radium (-226 And -228) | 0.2480 pCi/L 5% of the EPA limit 5 pCi/L | 1/4 | SYR4 | 2016–2019 |
| Dalapon | 9.136 µg/L 4.6% of the EPA limit 200 µg/L | 1/6 | SYR4 | 2013–2019 |
| P-Dichlorobenzene | 1.1 µg/L 1.5% of the EPA limit 75 µg/L | 1/6 | SYR4 | 2013–2019 |
63 contaminants tested, none detected
Utility contact
Frequently asked questions about Mcclendon Community Water Well
Is Mcclendon Community Water Well tap water safe to drink?
EPA monitoring detected 19 contaminants in Mcclendon Community Water Well's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mcclendon Community Water Well's water?
EPA monitoring detected Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), Trichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Mcclendon Community Water Well serve?
Mcclendon Community Water Well reports serving 336 people in Louisiana, per its EPA record.
Has Mcclendon Community Water Well had any water quality violations?
The EPA has 127 violations on file for Mcclendon Community Water Well, of which 78 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.