Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2026-01-01 → 2026-03-31 |
| MCL | Health-based | Archived | 2026-01-01 → 2026-03-31 |
| MCL | Health-based | Archived | 2026-01-01 → 2026-03-31 |
| MCL | Health-based | Archived | 2026-01-01 → 2026-03-31 |
| MCL | Health-based | Archived | 2026-01-01 → 2026-03-31 |
| MCL | Health-based | Archived | 2026-01-01 → 2026-03-31 |
| MCL | Health-based | Archived | 2025-10-01 → 2025-12-31 |
| MCL | Health-based | Archived | 2025-10-01 → 2025-12-31 |
| MCL | Health-based | Archived | 2025-10-01 → 2025-12-31 |
| MCL | Health-based | Archived | 2025-10-01 → 2025-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 45.7 µg/L No EPA limit set | 38/38 | SYR4 | 2013–2019 |
| Chloroform | 252 µg/L No EPA limit set | 38/38 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 88.5 µg/L No EPA limit set | 38/38 | SYR4 | 2013–2019 |
| TTHM | 303.7 µg/L 380% of the EPA limit, in the worst sample — 80 µg/L | 38/38 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 202 µg/L 337% of the EPA limit, in the worst sample — 60 µg/L | 38/38 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 118 µg/L No EPA limit set | 37/38 | SYR4 | 2013–2019 |
| Dibromochloromethane | 5.99 µg/L No EPA limit set | 36/38 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.5 µg/L No EPA limit set | 20/38 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 6.49 µg/L No EPA limit set | 16/38 | SYR4 | 2013–2019 |
| Lead | 32 µg/L 213% of the EPA limit, in the worst sample — 15 µg/L | 13/19 | SYR4 | 2012–2019 |
| Copper | 900 µg/L 69% of the EPA limit 1300 µg/L | 12/19 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2024 |
| Fluoride | 1900 µg/L 48% of the EPA limit 4000 µg/L | 6/6 | SYR4 | 2013–2019 |
| Barium | 17 µg/L 0.9% of the EPA limit 2000 µg/L | 4/6 | SYR4 | 2013–2019 |
| Di(2-ethylhexyl) Phthalate | 2.4 µg/L 40% of the EPA limit 6 µg/L | 4/6 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 39 µg/L 0.4% of the EPA limit 10000 µg/L | 4/28 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 0.8460 pCi/L 17% of the EPA limit 5 pCi/L | 2/4 | SYR4 | 2016–2019 |
| Monobromoacetic Acid | 8 µg/L No EPA limit set | 2/38 | SYR4 | 2013–2019 |
| Cadmium | 0.9100 µg/L 18% of the EPA limit 5 µg/L | 1/6 | SYR4 | 2013–2019 |
| Gross Alpha, Excl. Radon And U | 4.17 pCi/L 28% of the EPA limit 15 pCi/L | 1/4 | SYR4 | 2013–2016 |
60 contaminants tested, none detected
Utility contact
Frequently asked questions about Vixen Water
Is Vixen Water tap water safe to drink?
EPA monitoring detected 20 contaminants in Vixen Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Vixen Water's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Vixen Water serve?
Vixen Water reports serving 750 people in Louisiana, per its EPA record.
Has Vixen Water had any water quality violations?
The EPA has 1098 violations on file for Vixen Water, of which 844 are health-based (a contaminant limit or required treatment was breached) and 12 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.