Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2011-10-01 → 2011-10-31 |
| MCL | Health-based | Resolved | 2011-10-01 → 2011-10-31 |
| MCL | Health-based | Resolved | 2011-10-01 → 2011-10-31 |
| MCL | Health-based | Resolved | 2011-10-01 → 2011-10-31 |
| MCL | Health-based | Archived | 2003-07-01 → 2003-07-31 |
| MCL | Health-based | Archived | 2003-07-01 → 2003-07-31 |
| Other | Monitoring | Resolved | 2014-03-21 |
| Other | Monitoring | Resolved | 2014-03-21 |
| MR | Monitoring | Resolved | 2013-01-01 → 2013-08-31 |
| MR | Monitoring | Resolved | 2013-01-01 → 2013-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 3.2 µg/L No EPA limit set | 12/14 | SYR4 | 2013–2019 |
| TTHM | 14.2 µg/L 18% of the EPA limit 80 µg/L | 12/14 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 4.9 µg/L 8.2% of the EPA limit 60 µg/L | 12/14 | SYR4 | 2013–2019 |
| Bromodichloromethane | 4.1 µg/L No EPA limit set | 11/14 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.98 µg/L No EPA limit set | 11/14 | SYR4 | 2013–2019 |
| Dibromochloromethane | 5.5 µg/L No EPA limit set | 11/14 | SYR4 | 2013–2019 |
| Lead | 0.00038 mg/L 2.5% of the EPA limit 0.0150 mg/L | 11/11 | LCR | 2025 |
| Dichloroacetic Acid | 1.7 µg/L No EPA limit set | 8/14 | SYR4 | 2013–2019 |
| Lead | 13 µg/L 87% of the EPA limit 15 µg/L | 7/20 | SYR4 | 2012–2018 |
| Trichloroacetic Acid | 1.3 µg/L No EPA limit set | 7/14 | SYR4 | 2013–2019 |
| Bromoform | 4.8 µg/L No EPA limit set | 6/14 | SYR4 | 2013–2019 |
| Fluoride | 200 µg/L 5% of the EPA limit 4000 µg/L | 4/4 | SYR4 | 2014–2017 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 2/3 | SYR4 | 2014–2017 |
| Copper | 200 µg/L 15% of the EPA limit 1300 µg/L | 2/18 | SYR4 | 2012–2018 |
| Monobromoacetic Acid | 0.3670 µg/L No EPA limit set | 2/14 | SYR4 | 2013–2019 |
| Barium | 160 µg/L 8% of the EPA limit 2000 µg/L | 1/3 | SYR4 | 2014–2017 |
| Combined Radium (-226 And -228) | 0.4440 pCi/L 8.9% of the EPA limit 5 pCi/L | 1/3 | SYR4 | 2016–2017 |
| Di(2-ethylhexyl) Phthalate | 0.5400 µg/L 9% of the EPA limit 6 µg/L | 1/3 | SYR4 | 2016–2017 |
| Endothall | 6.3 µg/L 6.3% of the EPA limit 100 µg/L | 1/4 | SYR4 | 2014–2017 |
61 contaminants tested, none detected
Utility contact
Frequently asked questions about The Reserve Mhc Water
Is The Reserve Mhc Water tap water safe to drink?
EPA monitoring detected 19 contaminants in The Reserve Mhc Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in The Reserve Mhc Water's water?
EPA monitoring detected Chloroform, TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Dibromoacetic Acid, and others. The full list with the level and data source for each is above.
How many people does The Reserve Mhc Water serve?
The Reserve Mhc Water reports serving 159 people in Louisiana, per its EPA record.
Has The Reserve Mhc Water had any water quality violations?
The EPA has 27 violations on file for The Reserve Mhc Water, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.