Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Addressed | 2024-10-17 |
| MCL | Health-based | Archived | 2016-04-01 → 2016-04-30 |
| MCL | Health-based | Archived | 2016-04-01 → 2016-04-30 |
| MCL | Health-based | Archived | 2016-04-01 → 2016-04-30 |
| MCL | Health-based | Archived | 2016-04-01 → 2016-04-30 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-01-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-01-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-01-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-01-31 |
| MCL | Health-based | Resolved | 2013-01-01 → 2013-01-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 6.4 µg/L 43% of the EPA limit 15 µg/L
worst single sample: 7 µg/L | 13/16 | SYR4 | 2012–2019 |
| Copper | 100 µg/L 7.7% of the EPA limit 1300 µg/L | 7/16 | SYR4 | 2012–2019 |
| Chloroform | 6.84 µg/L No EPA limit set
worst single sample: 7.8 µg/L | 7/8 | SYR4 | 2013–2019 |
| TTHM | 10.351 µg/L 13% of the EPA limit 80 µg/L
worst single sample: 12.4 µg/L | 7/8 | SYR4 | 2013–2019 |
| Bromodichloromethane | 3.025 µg/L No EPA limit set
worst single sample: 3.3 µg/L | 6/8 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.245 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 6/8 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 3.375 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 6/8 | SYR4 | 2013–2019 |
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 6/6 | LCR | 2022 |
| Total Haloacetic Acids (HAA5) | 6.175 µg/L 10% of the EPA limit 60 µg/L
worst single sample: 6.5 µg/L | 6/8 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 2.675 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 6/8 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 0.7040 µg/L No EPA limit set
worst single sample: 0.7100 µg/L | 4/8 | SYR4 | 2013–2019 |
3 contaminants tested, none detected
Utility contact
Frequently asked questions about Edwards Millcreek Water
Is Edwards Millcreek Water tap water safe to drink?
EPA monitoring detected 11 contaminants in Edwards Millcreek Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Edwards Millcreek Water's water?
EPA monitoring detected Lead, Copper, Chloroform, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Edwards Millcreek Water serve?
Edwards Millcreek Water reports serving 114 people in Louisiana, per its EPA record.
Has Edwards Millcreek Water had any water quality violations?
The EPA has 208 violations on file for Edwards Millcreek Water, of which 22 are health-based (a contaminant limit or required treatment was breached) and 11 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.