Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2019-12-25 |
| TT | Health-based | Resolved | 2019-12-25 |
| TT | Health-based | Resolved | 2019-12-25 |
| TT | Health-based | Unaddressed | 2019-12-25 |
| TT | Health-based | Unaddressed | 2019-12-25 |
| TT | Health-based | Resolved | 2012-06-02 |
| TT | Health-based | Resolved | 2012-06-02 |
| Other | Monitoring | Unaddressed | 2020-02-10 |
| Other | Monitoring | Resolved | 2015-02-06 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 6.9 µg/L 46% of the EPA limit 15 µg/L
worst single sample: 9 µg/L | 15/17 | SYR4 | 2012–2018 |
| Chloroform | 5.4285 µg/L No EPA limit set
worst single sample: 5.76 µg/L | 14/15 | SYR4 | 2012–2019 |
| TTHM | 8.159 µg/L 10% of the EPA limit 80 µg/L
worst single sample: 8.25 µg/L | 14/15 | SYR4 | 2012–2019 |
| Bromodichloromethane | 2.472 µg/L No EPA limit set
worst single sample: 2.56 µg/L | 12/15 | SYR4 | 2012–2019 |
| Copper | 200 µg/L 15% of the EPA limit 1300 µg/L | 10/17 | SYR4 | 2012–2018 |
| Lead | 0.0080 mg/L 53% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2024 |
| Dibromochloromethane | 1.22 µg/L No EPA limit set
worst single sample: 1.26 µg/L | 6/15 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.575 µg/L No EPA limit set
worst single sample: 4.8 µg/L | 6/15 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 7.6 µg/L 13% of the EPA limit 60 µg/L
worst single sample: 8.2 µg/L | 6/15 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 2.8 µg/L No EPA limit set | 6/15 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1 µg/L No EPA limit set | 3/15 | SYR4 | 2012–2019 |
| Barium | 108.25 µg/L 5.4% of the EPA limit 2000 µg/L
worst single sample: 110 µg/L | 2/4 | SYR4 | 2014–2017 |
| Dalapon | 0.7200 µg/L 0.4% of the EPA limit 200 µg/L | 2/4 | SYR4 | 2014–2017 |
| Fluoride | 86.95 µg/L 2.2% of the EPA limit 4000 µg/L
worst single sample: 88 µg/L | 2/4 | SYR4 | 2014–2017 |
| Nitrate-Nitrite | 29 µg/L 0.3% of the EPA limit 10000 µg/L | 2/24 | SYR4 | 2012–2019 |
65 contaminants tested, none detected
Utility contact
Frequently asked questions about Village of Bienville Water
Is Village of Bienville Water tap water safe to drink?
EPA monitoring detected 15 contaminants in Village of Bienville Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Village of Bienville Water's water?
EPA monitoring detected Lead, Chloroform, TTHM, Bromodichloromethane, Copper, and others. The full list with the level and data source for each is above.
How many people does Village of Bienville Water serve?
Village of Bienville Water reports serving 360 people in Louisiana, per its EPA record.
Has Village of Bienville Water had any water quality violations?
The EPA has 51 violations on file for Village of Bienville Water, of which 8 are health-based (a contaminant limit or required treatment was breached) and 3 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.