Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2019-09-16 |
| TT | Health-based | Resolved | 2019-09-16 |
| TT | Health-based | Resolved | 2019-09-16 |
| TT | Health-based | Resolved | 2019-09-16 |
| TT | Health-based | Resolved | 2019-09-16 |
| TT | Health-based | Resolved | 2019-09-16 |
| TT | Health-based | Resolved | 2019-09-16 |
| TT | Health-based | Resolved | 2019-09-16 |
| TT | Health-based | Resolved | 2019-09-16 |
| TT | Health-based | Resolved | 2019-09-16 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 13.5 µg/L 90% of the EPA limit 15 µg/L
worst single sample: 20 µg/L | 26/33 | SYR4 | 2012–2018 |
| Copper | 310 µg/L 24% of the EPA limit 1300 µg/L
worst single sample: 500 µg/L | 20/33 | SYR4 | 2012–2018 |
| TTHM | 5.572 µg/L 7% of the EPA limit 80 µg/L
worst single sample: 5.83 µg/L | 13/14 | SYR4 | 2013–2019 |
| Chloroform | 1.646 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 12/14 | SYR4 | 2013–2019 |
| Dibromochloromethane | 2.392 µg/L No EPA limit set
worst single sample: 2.92 µg/L | 9/14 | SYR4 | 2013–2019 |
| Lead | 0.0060 mg/L 40% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2024 |
| Bromodichloromethane | 1.9195 µg/L No EPA limit set
worst single sample: 2 µg/L | 8/14 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.375 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 6/14 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 3.31 µg/L 5.5% of the EPA limit 60 µg/L
worst single sample: 3.5 µg/L | 6/14 | SYR4 | 2013–2019 |
| Fluoride | 158 µg/L 4% of the EPA limit 4000 µg/L
worst single sample: 160 µg/L | 5/5 | SYR4 | 2014–2017 |
| Trichloroacetic Acid | 0.9540 µg/L No EPA limit set
worst single sample: 0.9700 µg/L | 5/14 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.082 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 4/14 | SYR4 | 2013–2019 |
| Barium | 56.4 µg/L 2.8% of the EPA limit 2000 µg/L
worst single sample: 57 µg/L | 3/5 | SYR4 | 2014–2017 |
| Dalapon | 0.7200 µg/L 0.4% of the EPA limit 200 µg/L | 2/5 | SYR4 | 2014–2017 |
| Gross Beta Particle Activity | 4.904 pCi/L No EPA limit set
worst single sample: 5 pCi/L | 2/5 | SYR4 | 2014–2017 |
| Nitrate-Nitrite | 28 µg/L 0.3% of the EPA limit 10000 µg/L | 2/22 | SYR4 | 2012–2019 |
| Bromoform | 0.4900 µg/L No EPA limit set | 1/14 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 0.9360 pCi/L 19% of the EPA limit 5 pCi/L | 1/3 | SYR4 | 2017 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Alabama Water
Is Alabama Water tap water safe to drink?
EPA monitoring detected 18 contaminants in Alabama Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Alabama Water's water?
EPA monitoring detected Lead, Copper, TTHM, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Alabama Water serve?
Alabama Water reports serving 948 people in Louisiana, per its EPA record.
Has Alabama Water had any water quality violations?
The EPA has 50 violations on file for Alabama Water, of which 18 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.