Tap WaterIndex

← Kentucky

Tap water quality report

Campbellsville Municipal Water

EPA monitoring tested this supplier for 104 contaminants and detected 10. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

104
contaminants tested
10
detected
24,874
people served
84
health-based violations
Kentucky rankingsLead in KentuckyPFAS in Kentucky
Water source
Surface water
Ownership
Local government
Counties served
Taylor

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

84
health-based violations
343
violations on file
1
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2010-05-01 → 2010-05-31
TT Health-based Resolved 2010-05-01 → 2010-05-31
TT Health-based Resolved 2010-05-01 → 2010-05-31
TT Health-based Resolved 2010-05-01 → 2010-05-31
MCL Health-based Resolved 2004-10-01 → 2004-12-31
MCL Health-based Resolved 2004-10-01 → 2004-12-31
MCL Health-based Resolved 2004-10-01 → 2004-12-31
MCL Health-based Resolved 2004-10-01 → 2004-12-31
MCL Health-based Resolved 2004-07-01 → 2004-09-30
MCL Health-based Resolved 2004-07-01 → 2004-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Total Haloacetic Acids (HAA5)
83 µg/L 138%
of the EPA limit, in the worst sample — 60 µg/L
 124/124 SYR4 2012–2019
TTHM
98 µg/L 123%
of the EPA limit, in the worst sample — 80 µg/L
 118/119 SYR4 2012–2019
Copper
1460 µg/L 112%
of the EPA limit, in the worst sample — 1300 µg/L
 46/67 SYR4 2012–2019
Lead
64 µg/L 427%
of the EPA limit, in the worst sample — 15 µg/L
 20/60 SYR4 2014–2017
Nitrate
700 µg/L 7%
of the EPA limit 10000 µg/L
 16/16 SYR4 2012–2019
Lead
0.0030 mg/L 20%
of the EPA limit 0.0150 mg/L
 15/15 LCR 2023
Fluoride
1010 µg/L 25%
of the EPA limit 4000 µg/L
 14/16 SYR4 2012–2019
Atrazine
0.2900 µg/L 9.7%
of the EPA limit 3 µg/L
 11/25 SYR4 2012–2019
Barium
20 µg/L 1%
of the EPA limit 2000 µg/L
 8/8 SYR4 2012–2019
Nitrate-Nitrite
700 µg/L 7%
of the EPA limit 10000 µg/L
 6/6 SYR4 2012–2017
94 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAsbestosBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined Radium (-226 And -228)Combined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
GRAHAM, NEIL
Phone
270-469-3675
Email
neil.graham@campbellsville.us

Frequently asked questions about Campbellsville Municipal Water

Is Campbellsville Municipal Water tap water safe to drink?

EPA monitoring detected 10 contaminants in Campbellsville Municipal Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Campbellsville Municipal Water's water?

EPA monitoring detected Total Haloacetic Acids (HAA5), TTHM, Copper, Lead, Nitrate, and others. The full list with the level and data source for each is above.

How many people does Campbellsville Municipal Water serve?

Campbellsville Municipal Water reports serving 24,874 people in Kentucky, per its EPA record.

Has Campbellsville Municipal Water had any water quality violations?

The EPA has 343 violations on file for Campbellsville Municipal Water, of which 84 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.