Tap WaterIndex

← Kentucky

Tap water quality report

Jonathan Creek Water District

EPA monitoring tested this supplier for 98 contaminants and detected 10. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

98
contaminants tested
10
detected
7,182
people served
0
health-based violations
Kentucky rankingsLead in KentuckyPFAS in Kentucky
Water source
Ground water
Ownership
Local government
Counties served
Marshall

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
215
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 2016-07-01 → 2016-07-31
MR Monitoring Resolved 2016-07-01 → 2016-07-31
MR Monitoring Resolved 2016-07-01 → 2016-07-31
MR Monitoring Resolved 2016-07-01 → 2016-07-31
MR Monitoring Resolved 2016-05-01 → 2016-05-31
MR Monitoring Resolved 2016-05-01 → 2016-05-31
MR Monitoring Resolved 2016-05-01 → 2016-05-31
MR Monitoring Resolved 2016-05-01 → 2016-05-31
MR Monitoring Resolved 2016-04-01 → 2016-04-30
MR Monitoring Resolved 2016-04-01 → 2016-04-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
138 µg/L 11%
of the EPA limit 1300 µg/L
 68/68 SYR4 2012–2019
Lead
0.0040 mg/L 27%
of the EPA limit 0.0150 mg/L
 15/15 LCR 2025
Fluoride
1400 µg/L 35%
of the EPA limit 4000 µg/L
 10/10 SYR4 2012–2019
Lead
13 µg/L 87%
of the EPA limit 15 µg/L
 6/60 SYR4 2013–2019
TTHM
7 µg/L 8.8%
of the EPA limit 80 µg/L
 3/14 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
43 µg/L 72%
of the EPA limit 60 µg/L
 3/14 SYR4 2012–2019
Barium
13 µg/L 0.7%
of the EPA limit 2000 µg/L
 2/2 SYR4 2014–2017
Combined Radium (-226 And -228)
3.4 pCi/L 68%
of the EPA limit 5 pCi/L
 2/2 SYR4 2014–2017
Nitrate
1720 µg/L 17%
of the EPA limit 10000 µg/L
 2/16 SYR4 2012–2019
Thallium, Total
0.5000 µg/L 25%
of the EPA limit 2 µg/L
 1/2 SYR4 2014–2017
88 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
LOVETT, DAVID
Phone
270-354-8474
Email
JONCRKWATER@WK.NET

Frequently asked questions about Jonathan Creek Water District

Is Jonathan Creek Water District tap water safe to drink?

EPA monitoring detected 10 contaminants in Jonathan Creek Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Jonathan Creek Water District's water?

EPA monitoring detected Copper, Lead, Fluoride, Lead, TTHM, and others. The full list with the level and data source for each is above.

How many people does Jonathan Creek Water District serve?

Jonathan Creek Water District reports serving 7,182 people in Kentucky, per its EPA record.

Has Jonathan Creek Water District had any water quality violations?

The EPA has 215 violations on file for Jonathan Creek Water District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.