Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2018-07-01 → 2018-09-30 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-09-30 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 172.4 µg/L 216% of the EPA limit, in the worst sample — 80 µg/L | 79/79 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 83.4 µg/L 139% of the EPA limit, in the worst sample — 60 µg/L | 79/79 | SYR4 | 2012–2019 |
| Copper | 464 µg/L 36% of the EPA limit 1300 µg/L | 64/68 | SYR4 | 2012–2019 |
| Lead | 28 µg/L 187% of the EPA limit, in the worst sample — 15 µg/L | 27/60 | SYR4 | 2012–2018 |
| Fluoride | 1280 µg/L 32% of the EPA limit 4000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Nitrate | 860 µg/L 8.6% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2024 |
| Barium | 39 µg/L 2% of the EPA limit 2000 µg/L | 5/8 | SYR4 | 2012–2019 |
| Selenium | 3 µg/L 6% of the EPA limit 50 µg/L | 2/8 | SYR4 | 2012–2019 |
| Antimony, Total | 1 µg/L 17% of the EPA limit 6 µg/L | 1/8 | SYR4 | 2012–2019 |
| Atrazine | 0.0810 µg/L 2.7% of the EPA limit 3 µg/L | 1/6 | SYR4 | 2012–2018 |
| Combined Radium (-226 And -228) | 1.5 pCi/L 30% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2014 |
| Nitrate-Nitrite | 590 µg/L 5.9% of the EPA limit 10000 µg/L | 1/1 | SYR4 | 2014 |
| Thallium, Total | 0.1000 µg/L 5% of the EPA limit 2 µg/L | 1/8 | SYR4 | 2012–2019 |
86 contaminants tested, none detected
Utility contact
Frequently asked questions about Russell Water Company
Is Russell Water Company tap water safe to drink?
EPA monitoring detected 14 contaminants in Russell Water Company's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Russell Water Company's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Copper, Lead, Fluoride, and others. The full list with the level and data source for each is above.
How many people does Russell Water Company serve?
Russell Water Company reports serving 5,181 people in Kentucky, per its EPA record.
Has Russell Water Company had any water quality violations?
The EPA has 325 violations on file for Russell Water Company, of which 79 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.