Tap WaterIndex

← Kentucky

Tap water quality report

Sandy Hook Water District

EPA monitoring tested this supplier for 102 contaminants and detected 18. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

102
contaminants tested
18
detected
3,528
people served
0
health-based violations
Kentucky rankingsLead in KentuckyPFAS in Kentucky
Water source
Ground water
Ownership
Local government
Counties served
Elliott

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
37
violations on file
0
still open
ViolationTypeStatusPeriod
MON Monitoring Resolved 2025-07-01 → 2025-07-31
MON Monitoring Resolved 2025-07-01 → 2025-07-31
MON Monitoring Resolved 2025-07-01 → 2025-07-31
Other Monitoring Resolved 2024-07-01
Other Monitoring Resolved 2024-07-01
Other Monitoring Resolved 2020-07-01
Other Monitoring Resolved 2020-07-01
Other Monitoring Resolved 2018-07-01
Other Monitoring Resolved 2018-07-01
MR Monitoring Resolved 2017-10-01 → 2017-10-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
1049 µg/L 81%
of the EPA limit 1300 µg/L
worst single sample: 1300 µg/L
49/49 SYR4 2012–2019
Lead
2.82 µg/L 19%
of the EPA limit 15 µg/L
worst single sample: 5 µg/L
25/40 SYR4 2014–2017
TTHM
26.945 µg/L 34%
of the EPA limit 80 µg/L
worst single sample: 28.7 µg/L
14/14 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
13.74 µg/L 23%
of the EPA limit 60 µg/L
worst single sample: 15.3 µg/L
13/14 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 12/12 LCR 2023
Fluoride
1105 µg/L 28%
of the EPA limit 4000 µg/L
worst single sample: 1280 µg/L
11/11 SYR4 2012–2019
Nitrate
300 µg/L 3%
of the EPA limit 10000 µg/L
 10/16 SYR4 2012–2019
Barium
238.85 µg/L 12%
of the EPA limit 2000 µg/L
worst single sample: 240 µg/L
2/2 SYR4 2014–2017
Combined Radium (-226 And -228)
3.6145 pCi/L 72%
of the EPA limit 5 pCi/L
worst single sample: 3.71 pCi/L
2/2 SYR4 2013–2019
Nitrate-Nitrite
286 µg/L 2.9%
of the EPA limit 10000 µg/L
worst single sample: 300 µg/L
2/3 SYR4 2014–2016
Thallium, Total
2.293 µg/L 115%
of the EPA limit, at the 95th percentile of samples — 2 µg/L
worst single sample: 2.4 µg/L
2/4 SYR4 2014–2019
Arsenic
3 µg/L 30%
of the EPA limit 10 µg/L
 1/2 SYR4 2014–2017
Beryllium, Total
1 µg/L 25%
of the EPA limit 4 µg/L
 1/2 SYR4 2014–2017
Cadmium
2.9 µg/L 58%
of the EPA limit 5 µg/L
 1/2 SYR4 2014–2017
Chromium
1 µg/L 1%
of the EPA limit 100 µg/L
 1/2 SYR4 2014–2017
Combined Uranium
1 µg/L 3.3%
of the EPA limit 30 µg/L
 1/2 SYR4 2013–2019
Gross Alpha, Excl. Radon And U
4 pCi/L 27%
of the EPA limit 15 pCi/L
 1/2 SYR4 2013–2019
Selenium
1 µg/L 2%
of the EPA limit 50 µg/L
 1/2 SYR4 2014–2017
84 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalAtrazineBhc-GammaBenzeneBenzo(A)PyreneChlorobenzeneCyanideCarbofuranCarbon TetrachlorideChlordaneDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
FANNIN, NICHOLE
Phone
606-738-6282
Email
nikki.shwd@outlook.com

Frequently asked questions about Sandy Hook Water District

Is Sandy Hook Water District tap water safe to drink?

EPA monitoring detected 18 contaminants in Sandy Hook Water District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Sandy Hook Water District's water?

EPA monitoring detected Copper, Lead, TTHM, Total Haloacetic Acids (HAA5), Lead, and others. The full list with the level and data source for each is above.

How many people does Sandy Hook Water District serve?

Sandy Hook Water District reports serving 3,528 people in Kentucky, per its EPA record.

Has Sandy Hook Water District had any water quality violations?

The EPA has 37 violations on file for Sandy Hook Water District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.