Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
| MCL | Health-based | Resolved | 2009-10-01 → 2009-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 26.6 µg/L No EPA limit set
worst single sample: 28 µg/L | 28/28 | SYR4 | 2013–2019 |
| Chloroform | 58.85 µg/L No EPA limit set
worst single sample: 69 µg/L | 28/28 | SYR4 | 2013–2019 |
| Dibromochloromethane | 16.6 µg/L No EPA limit set
worst single sample: 20 µg/L | 28/28 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 49.2 µg/L No EPA limit set
worst single sample: 63 µg/L | 28/28 | SYR4 | 2013–2019 |
| TTHM | 86.65 µg/L 108% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 92 µg/L | 28/28 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 90.75 µg/L 151% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 110 µg/L | 28/28 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 35 µg/L No EPA limit set
worst single sample: 51 µg/L | 28/28 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 3.95 µg/L No EPA limit set
worst single sample: 6.1 µg/L | 26/28 | SYR4 | 2013–2019 |
| Copper | 29.5 µg/L 2.3% of the EPA limit 1300 µg/L
worst single sample: 96 µg/L | 20/20 | SYR4 | 2015–2018 |
| Bromoform | 2.69 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 15/28 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 7.64 µg/L No EPA limit set
worst single sample: 9.5 µg/L | 13/28 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 1.585 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 10/28 | SYR4 | 2013–2019 |
| Lead | 0.0019 mg/L 13% of the EPA limit 0.0150 mg/L | 6/6 | LCR | 2024 |
| Lead | 2.3 µg/L 15% of the EPA limit 15 µg/L
worst single sample: 2.4 µg/L | 5/20 | SYR4 | 2015–2018 |
Utility contact
Frequently asked questions about Wilson Co Rwd 10
Is Wilson Co Rwd 10 tap water safe to drink?
EPA monitoring detected 14 contaminants in Wilson Co Rwd 10's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Wilson Co Rwd 10's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Wilson Co Rwd 10 serve?
Wilson Co Rwd 10 reports serving 808 people in Kansas, per its EPA record.
Has Wilson Co Rwd 10 had any water quality violations?
The EPA has 294 violations on file for Wilson Co Rwd 10, of which 233 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.