Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2017-11-01 → 2017-11-30 |
| TT | Health-based | Resolved | 2017-11-01 → 2017-11-30 |
| TT | Health-based | Resolved | 2017-11-01 → 2017-11-30 |
| TT | Health-based | Resolved | 2017-11-01 → 2017-11-30 |
| MCL | Health-based | Resolved | 2012-07-01 → 2012-07-31 |
| MCL | Health-based | Resolved | 2012-07-01 → 2012-07-31 |
| MCL | Health-based | Resolved | 2012-07-01 → 2012-07-31 |
| MCL | Health-based | Resolved | 2012-07-01 → 2012-07-31 |
| MCL | Health-based | Resolved | 2007-12-01 → 2007-12-31 |
| MCL | Health-based | Resolved | 2007-12-01 → 2007-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 3300 µg/L 254% of the EPA limit, in the worst sample — 1300 µg/L | 193/193 | SYR4 | 2012–2019 |
| Lead | 33 µg/L 220% of the EPA limit, in the worst sample — 15 µg/L | 92/192 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.6 µg/L No EPA limit set | 90/101 | SYR4 | 2012–2019 |
| Bromodichloromethane | 9.8 µg/L No EPA limit set | 87/102 | SYR4 | 2012–2019 |
| Dibromochloromethane | 9.2 µg/L No EPA limit set | 86/102 | SYR4 | 2012–2019 |
| Bromoform | 6.7 µg/L No EPA limit set | 85/102 | SYR4 | 2012–2019 |
| TTHM | 58 µg/L 73% of the EPA limit 80 µg/L | 85/102 | SYR4 | 2012–2019 |
| Chloroform | 36 µg/L No EPA limit set | 66/102 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.2 µg/L No EPA limit set | 53/101 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 8.9 µg/L 15% of the EPA limit 60 µg/L | 49/101 | SYR4 | 2012–2019 |
| Lead | 0.0013 mg/L 8.3% of the EPA limit 0.0150 mg/L | 30/30 | LCR | 2026 |
| Monobromoacetic Acid | 2.8 µg/L No EPA limit set | 29/101 | SYR4 | 2012–2019 |
| Nitrate | 5900 µg/L 59% of the EPA limit 10000 µg/L | 28/28 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 2.1 µg/L No EPA limit set | 19/101 | SYR4 | 2012–2019 |
| Arsenic | 2 µg/L 20% of the EPA limit 10 µg/L | 3/3 | SYR4 | 2012–2018 |
| Barium | 130 µg/L 6.5% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2012–2018 |
| Selenium | 10 µg/L 20% of the EPA limit 50 µg/L | 3/3 | SYR4 | 2012–2018 |
| Fluoride | 330 µg/L 8.3% of the EPA limit 4000 µg/L | 2/3 | SYR4 | 2012–2018 |
| Lithium | 13.2 µg/L No EPA limit set | 2/2 | UCMR-5 | 2025 |
| Chromium | 1.7 µg/L 1.7% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2012–2018 |
60 contaminants tested, none detected
Utility contact
Frequently asked questions about Haysville, City of
Is Haysville, City of tap water safe to drink?
EPA monitoring detected 20 contaminants in Haysville, City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Haysville, City of's water?
EPA monitoring detected Copper, Lead, Dibromoacetic Acid, Bromodichloromethane, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Haysville, City of serve?
Haysville, City of reports serving 11,315 people in Kansas, per its EPA record.
Has Haysville, City of had any water quality violations?
The EPA has 35 violations on file for Haysville, City of, of which 16 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.