Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Archived | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-04-30 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-04-30 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-04-30 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-04-30 |
| MCL | Health-based | Resolved | 2003-05-01 → 2003-05-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 250 µg/L 19% of the EPA limit 1300 µg/L
worst single sample: 430 µg/L | 61/61 | SYR4 | 2014–2018 |
| Bromodichloromethane | 24.55 µg/L No EPA limit set
worst single sample: 35 µg/L | 20/20 | SYR4 | 2014–2019 |
| Chloroform | 91.15 µg/L No EPA limit set
worst single sample: 94 µg/L | 20/20 | SYR4 | 2014–2019 |
| Dibromochloromethane | 8.345 µg/L No EPA limit set
worst single sample: 9.2 µg/L | 20/20 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 40.15 µg/L No EPA limit set
worst single sample: 43 µg/L | 20/20 | SYR4 | 2014–2019 |
| TTHM | 120.5 µg/L 151% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 130 µg/L | 20/20 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 100.5 µg/L 168% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 110 µg/L | 20/20 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 54.45 µg/L No EPA limit set
worst single sample: 63 µg/L | 20/20 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 2.53 µg/L No EPA limit set
worst single sample: 2.8 µg/L | 19/20 | SYR4 | 2014–2019 |
| Lead | 3.955 µg/L 26% of the EPA limit 15 µg/L
worst single sample: 4.8 µg/L | 14/61 | SYR4 | 2014–2018 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2023 |
| Monochloroacetic Acid | 9.675 µg/L No EPA limit set
worst single sample: 16 µg/L | 12/20 | SYR4 | 2014–2019 |
| Bromoform | 0.9575 µg/L No EPA limit set
worst single sample: 0.9800 µg/L | 10/20 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 5.24 µg/L No EPA limit set
worst single sample: 5.6 µg/L | 9/20 | SYR4 | 2014–2019 |
Utility contact
Frequently asked questions about Atchison Co Rwd 6
Is Atchison Co Rwd 6 tap water safe to drink?
EPA monitoring detected 14 contaminants in Atchison Co Rwd 6's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Atchison Co Rwd 6's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Atchison Co Rwd 6 serve?
Atchison Co Rwd 6 reports serving 670 people in Kansas, per its EPA record.
Has Atchison Co Rwd 6 had any water quality violations?
The EPA has 144 violations on file for Atchison Co Rwd 6, of which 25 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.