Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2007-05-01 → 2007-05-31 |
| MCL | Health-based | Resolved | 2007-05-01 → 2007-05-31 |
| MCL | Health-based | Resolved | 2007-05-01 → 2007-05-31 |
| MCL | Health-based | Resolved | 2007-05-01 → 2007-05-31 |
| MCL | Health-based | Resolved | 1996-12-01 → 1996-12-31 |
| MCL | Health-based | Resolved | 1996-12-01 → 1996-12-31 |
| MCL | Health-based | Resolved | 1996-12-01 → 1996-12-31 |
| MCL | Health-based | Resolved | 1996-12-01 → 1996-12-31 |
| MCL | Health-based | Resolved | 1996-12-01 → 1996-12-31 |
| MCL | Health-based | Resolved | 1996-12-01 → 1996-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 231 µg/L 18% of the EPA limit 1300 µg/L
worst single sample: 330 µg/L | 10/10 | SYR4 | 2014–2017 |
| Dichloroacetic Acid | 11.48 µg/L No EPA limit set
worst single sample: 14 µg/L | 10/10 | SYR4 | 2014–2019 |
| Bromodichloromethane | 30 µg/L No EPA limit set
worst single sample: 38 µg/L | 9/9 | SYR4 | 2015–2019 |
| Chloroform | 89.6 µg/L No EPA limit set
worst single sample: 120 µg/L | 9/9 | SYR4 | 2015–2019 |
| Dibromochloromethane | 8.06 µg/L No EPA limit set
worst single sample: 8.1 µg/L | 9/9 | SYR4 | 2015–2019 |
| TTHM | 123.6 µg/L 155% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 160 µg/L | 9/9 | SYR4 | 2015–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 8/8 | LCR | 2023 |
| Total Haloacetic Acids (HAA5) | 34.9 µg/L 58% of the EPA limit 60 µg/L
worst single sample: 37 µg/L | 7/10 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 22 µg/L No EPA limit set | 7/10 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 0.8710 µg/L No EPA limit set
worst single sample: 0.8800 µg/L | 4/10 | SYR4 | 2014–2019 |
| Bromoform | 0.7140 µg/L No EPA limit set
worst single sample: 0.7200 µg/L | 3/9 | SYR4 | 2015–2019 |
3 contaminants tested, none detected
Utility contact
Frequently asked questions about Atchison Co Rwd 3
Is Atchison Co Rwd 3 tap water safe to drink?
EPA monitoring detected 11 contaminants in Atchison Co Rwd 3's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Atchison Co Rwd 3's water?
EPA monitoring detected Copper, Dichloroacetic Acid, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Atchison Co Rwd 3 serve?
Atchison Co Rwd 3 reports serving 110 people in Kansas, per its EPA record.
Has Atchison Co Rwd 3 had any water quality violations?
The EPA has 172 violations on file for Atchison Co Rwd 3, of which 14 are health-based (a contaminant limit or required treatment was breached) and 6 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.