Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Unaddressed | 2025-06-16 |
| TT | Health-based | Unaddressed | 2025-06-16 |
| MCL | Health-based | Resolved | 2004-04-01 → 2004-04-30 |
| MCL | Health-based | Resolved | 2004-04-01 → 2004-04-30 |
| MCL | Health-based | Resolved | 2004-04-01 → 2004-04-30 |
| MCL | Health-based | Resolved | 2004-04-01 → 2004-04-30 |
| MCL | Health-based | Resolved | 1991-07-01 → 1991-07-31 |
| MCL | Health-based | Resolved | 1991-07-01 → 1991-07-31 |
| MCL | Health-based | Resolved | 1991-07-01 → 1991-07-31 |
| MR | Monitoring | Unaddressed | 2025-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 105 µg/L 8.1% of the EPA limit 1300 µg/L
worst single sample: 150 µg/L | 16/16 | SYR4 | 2013–2019 |
| Bromodichloromethane | 7.5 µg/L No EPA limit set
worst single sample: 7.7 µg/L | 6/6 | SYR4 | 2014–2019 |
| Chloroform | 19 µg/L No EPA limit set
worst single sample: 20 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 2.925 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 6/6 | SYR4 | 2014–2019 |
| Dibromochloromethane | 1.2 µg/L No EPA limit set | 6/6 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 18.5 µg/L No EPA limit set
worst single sample: 20 µg/L | 6/6 | SYR4 | 2014–2019 |
| Lead | 0.0011 mg/L 7.3% of the EPA limit 0.0150 mg/L | 6/6 | LCR | 2022 |
| TTHM | 27.5 µg/L 34% of the EPA limit 80 µg/L
worst single sample: 29 µg/L | 6/6 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 33 µg/L 55% of the EPA limit 60 µg/L
worst single sample: 36 µg/L | 6/6 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 9.75 µg/L No EPA limit set
worst single sample: 10 µg/L | 6/6 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 1.057 µg/L No EPA limit set
worst single sample: 1.1 µg/L | 3/6 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 4.24 µg/L No EPA limit set
worst single sample: 4.3 µg/L | 3/6 | SYR4 | 2014–2019 |
| Lead | 10.645 µg/L 71% of the EPA limit 15 µg/L
worst single sample: 11 µg/L | 2/16 | SYR4 | 2013–2019 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about Allen Co Rwd 10
Is Allen Co Rwd 10 tap water safe to drink?
EPA monitoring detected 13 contaminants in Allen Co Rwd 10's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Allen Co Rwd 10's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromoacetic Acid, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Allen Co Rwd 10 serve?
Allen Co Rwd 10 reports serving 125 people in Kansas, per its EPA record.
Has Allen Co Rwd 10 had any water quality violations?
The EPA has 121 violations on file for Allen Co Rwd 10, of which 9 are health-based (a contaminant limit or required treatment was breached) and 11 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.