Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2008-04-01 → 2008-06-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-06-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-06-30 |
| MCL | Health-based | Resolved | 2008-04-01 → 2008-06-30 |
| Other | Monitoring | Resolved | 2025-07-01 |
| Other | Monitoring | Resolved | 2025-07-01 |
| Other | Monitoring | Resolved | 2024-07-01 |
| Other | Monitoring | Resolved | 2024-07-01 |
| Other | Monitoring | Resolved | 2024-07-01 |
| RPT | Monitoring | Resolved | 2016-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 93.5 µg/L 117% of the EPA limit, in the worst sample — 80 µg/L | 57/57 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 88.3 µg/L 147% of the EPA limit, in the worst sample — 60 µg/L | 57/57 | SYR4 | 2012–2019 |
| Atrazine | 0.5100 µg/L 17% of the EPA limit 3 µg/L | 18/32 | SYR4 | 2012–2019 |
| Nitrate | 690 µg/L 6.9% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Copper | 264 µg/L 20% of the EPA limit 1300 µg/L | 10/10 | SYR4 | 2018 |
| Fluoride | 866 µg/L 22% of the EPA limit 4000 µg/L | 7/8 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 14% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2024 |
| Simazine | 0.8300 µg/L 21% of the EPA limit 4 µg/L | 4/32 | SYR4 | 2012–2019 |
| Barium | 199 µg/L 10% of the EPA limit 2000 µg/L | 3/8 | SYR4 | 2012–2019 |
| Bromodichloromethane | 10.6 µg/L No EPA limit set | 3/3 | SYR4 | 2012–2014 |
| Chloroform | 29 µg/L No EPA limit set | 3/3 | SYR4 | 2012–2014 |
| Chromium | 2 µg/L 2% of the EPA limit 100 µg/L | 2/8 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1 µg/L No EPA limit set | 2/3 | SYR4 | 2012–2014 |
| Antimony, Total | 0.5000 µg/L 8.3% of the EPA limit 6 µg/L | 1/8 | SYR4 | 2012–2019 |
| Arsenic | 0.6000 µg/L 6% of the EPA limit 10 µg/L | 1/8 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 0.7600 pCi/L 5.1% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2019 |
| Methoxychlor | 0.2800 µg/L 0.7% of the EPA limit 40 µg/L | 1/27 | SYR4 | 2012–2018 |
| Selenium | 2.1 µg/L 4.2% of the EPA limit 50 µg/L | 1/8 | SYR4 | 2012–2019 |
55 contaminants tested, none detected
Utility contact
Frequently asked questions about Osgood Water Department
Is Osgood Water Department tap water safe to drink?
EPA monitoring detected 18 contaminants in Osgood Water Department's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Osgood Water Department's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Atrazine, Nitrate, Copper, and others. The full list with the level and data source for each is above.
How many people does Osgood Water Department serve?
Osgood Water Department reports serving 1,692 people in Indiana, per its EPA record.
Has Osgood Water Department had any water quality violations?
The EPA has 40 violations on file for Osgood Water Department, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.