← Indiana

Tap water quality report

Washington Twp Water Authority

EPA monitoring tested this supplier for 35 contaminants and detected 5. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

35
contaminants tested
5
detected
3,825
people served
0
health-based violations
Water source
SWP
Ownership
Local government
Counties served
Monroe

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
4
violations on file
0
still open
ViolationTypeStatusPeriod
Other Monitoring Resolved 2013-07-01
Other Monitoring Resolved 2013-07-01
MR Monitoring Resolved 1994-07-01
Other Monitoring Archived 1989-06-29 → 1994-06-28

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
89.1 µg/L 111%
of the EPA limit, in the worst sample — 80 µg/L
62/62 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
73.1 µg/L 122%
of the EPA limit, in the worst sample — 60 µg/L
62/62 SYR4 2012–2019
Copper
44 µg/L 3.4%
of the EPA limit 1300 µg/L
20/20 SYR4 2018
Lead
0.00070 mg/L 4.7%
of the EPA limit 0.0150 mg/L
15/15 LCR 2024
Lead
12 µg/L 80%
of the EPA limit 15 µg/L
3/20 SYR4 2018
30 contaminants tested, none detected
11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaHfpo-DaNetfosaaNfdhaNmefosaaPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaLithium

Utility contact

Contact
SCHMITTER, MARK R.
Phone
812-360-0044
Email
mark@wtwc.org

Frequently asked questions about Washington Twp Water Authority

Is Washington Twp Water Authority tap water safe to drink?

EPA monitoring detected 5 contaminants in Washington Twp Water Authority's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Washington Twp Water Authority's water?

EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Copper, Lead, Lead. The full list with the level and data source for each is above.

How many people does Washington Twp Water Authority serve?

Washington Twp Water Authority reports serving 3,825 people in Indiana, per its EPA record.

Has Washington Twp Water Authority had any water quality violations?

The EPA has 4 violations on file for Washington Twp Water Authority, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.