Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 1993-05-01 → 1993-05-31 |
| MCL | Health-based | Archived | 1993-05-01 → 1993-05-31 |
| MCL | Health-based | Archived | 1993-05-01 → 1993-05-31 |
| MCL | Health-based | Archived | 1993-05-01 → 1993-05-31 |
| MCL | Health-based | Archived | 1991-12-01 → 1991-12-31 |
| MCL | Health-based | Archived | 1991-12-01 → 1991-12-31 |
| MCL | Health-based | Archived | 1991-12-01 → 1991-12-31 |
| MR | Monitoring | Archived | 1994-06-01 → 1994-06-30 |
| MR | Monitoring | Archived | 1994-06-01 → 1994-06-30 |
| MR | Monitoring | Archived | 1994-06-01 → 1994-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 35.3 µg/L No EPA limit set | 58/58 | SYR4 | 2012–2019 |
| TTHM | 45.7 µg/L 57% of the EPA limit 80 µg/L | 58/58 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 25.9 µg/L 43% of the EPA limit 60 µg/L | 58/58 | SYR4 | 2012–2019 |
| Bromodichloromethane | 8.7 µg/L No EPA limit set | 56/58 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 20.7 µg/L No EPA limit set | 56/58 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 9 µg/L No EPA limit set | 55/58 | SYR4 | 2012–2019 |
| Copper | 367 µg/L 28% of the EPA limit 1300 µg/L | 34/40 | SYR4 | 2014–2017 |
| Dibromochloromethane | 1.9 µg/L No EPA limit set | 28/58 | SYR4 | 2012–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 17/17 | LCR | 2025 |
| Nitrate | 2400 µg/L 24% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 2.5 µg/L No EPA limit set | 10/58 | SYR4 | 2012–2019 |
| Lead | 4 µg/L 27% of the EPA limit 15 µg/L | 9/40 | SYR4 | 2014–2017 |
| Monochloroacetic Acid | 3.3 µg/L No EPA limit set | 9/58 | SYR4 | 2012–2019 |
| Fluoride | 1090 µg/L 27% of the EPA limit 4000 µg/L | 8/8 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 2400 µg/L 24% of the EPA limit 10000 µg/L | 8/8 | SYR4 | 2012–2019 |
| Atrazine | 1.5 µg/L 50% of the EPA limit 3 µg/L | 3/15 | SYR4 | 2012–2019 |
| 2,4-D | 2.9 µg/L 4.1% of the EPA limit 70 µg/L | 1/11 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 0.2600 pCi/L 5.2% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2017 |
91 contaminants tested, none detected
Utility contact
Frequently asked questions about Nashville
Is Nashville tap water safe to drink?
EPA monitoring detected 18 contaminants in Nashville's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Nashville's water?
EPA monitoring detected Chloroform, TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Nashville serve?
Nashville reports serving 3,230 people in Illinois, per its EPA record.
Has Nashville had any water quality violations?
The EPA has 14 violations on file for Nashville, of which 7 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.