← Illinois

Tap water quality report

Waverly

EPA monitoring tested this supplier for 78 contaminants and detected 23. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

78
contaminants tested
23
detected
1,194
people served
131
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Morgan

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

131
health-based violations
170
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2010-04-01 → 2010-06-30
MCL Health-based Resolved 2010-04-01 → 2010-06-30
MCL Health-based Resolved 2010-04-01 → 2010-06-30
MCL Health-based Resolved 2010-04-01 → 2010-06-30
MCL Health-based Resolved 2010-04-01 → 2010-06-30
MCL Health-based Resolved 2010-04-01 → 2010-06-30
MCL Health-based Resolved 2010-04-01 → 2010-06-30
MCL Health-based Resolved 2010-01-01 → 2010-03-31
MCL Health-based Resolved 2010-01-01 → 2010-03-31
MCL Health-based Resolved 2010-01-01 → 2010-03-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
19.6 µg/L
No EPA limit set
54/54 SYR4 2012–2019
Chloroform
103.2 µg/L
No EPA limit set
54/54 SYR4 2012–2019
Dibromochloromethane
6.12 µg/L
No EPA limit set
54/54 SYR4 2012–2019
TTHM
121.5 µg/L 152%
of the EPA limit, in the worst sample — 80 µg/L
54/54 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
52 µg/L 87%
of the EPA limit 60 µg/L
53/53 SYR4 2012–2019
Trichloroacetic Acid
27.7 µg/L
No EPA limit set
53/53 SYR4 2012–2019
Dichloroacetic Acid
26.8 µg/L
No EPA limit set
48/53 SYR4 2012–2019
Nitrate
6800 µg/L 68%
of the EPA limit 10000 µg/L
30/30 SYR4 2012–2019
Copper
95 µg/L 7.3%
of the EPA limit 1300 µg/L
28/30 SYR4 2013–2019
Lead
0.0016 mg/L 11%
of the EPA limit 0.0150 mg/L
16/16 LCR 2025
Atrazine
3.3 µg/L 110%
of the EPA limit, in the worst sample — 3 µg/L
13/26 SYR4 2012–2019
Barium
20 µg/L 1%
of the EPA limit 2000 µg/L
8/8 SYR4 2012–2019
Fluoride
988 µg/L 25%
of the EPA limit 4000 µg/L
8/8 SYR4 2012–2019
Dibromoacetic Acid
1.34 µg/L
No EPA limit set
6/53 SYR4 2012–2019
2,4-D
1.7 µg/L 2.4%
of the EPA limit 70 µg/L
3/18 SYR4 2012–2019
Arsenic
1.7 µg/L 17%
of the EPA limit 10 µg/L
3/8 SYR4 2012–2019
Monochloroacetic Acid
4.36 µg/L
No EPA limit set
3/53 SYR4 2012–2019
Nitrate-Nitrite
2500 µg/L 25%
of the EPA limit 10000 µg/L
3/3 SYR4 2012–2018
Simazine
2.1 µg/L 53%
of the EPA limit 4 µg/L
3/18 SYR4 2012–2019
Lead
2.9 µg/L 19%
of the EPA limit 15 µg/L
2/30 SYR4 2013–2019
Monobromoacetic Acid
6.45 µg/L
No EPA limit set
2/53 SYR4 2012–2019
Combined Radium (-226 And -228)
1.22 pCi/L 24%
of the EPA limit 5 pCi/L
1/1 SYR4 2014
Selenium
3.4 µg/L 6.8%
of the EPA limit 50 µg/L
1/8 SYR4 2012–2019
55 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TPAntimony, TotalBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNitriteOxamylPentachlorophenolPicloramStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
SMITH, ANDY
Phone
217-435-4111
Email
BUKWEAT62@GMAIL.COM

Frequently asked questions about Waverly

Is Waverly tap water safe to drink?

EPA monitoring detected 23 contaminants in Waverly's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Waverly's water?

EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Waverly serve?

Waverly reports serving 1,194 people in Illinois, per its EPA record.

Has Waverly had any water quality violations?

The EPA has 170 violations on file for Waverly, of which 131 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.