Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2023-01-01 → 2025-12-31 |
| MCL | Health-based | Resolved | 2023-01-01 → 2025-12-31 |
| MCL | Health-based | Resolved | 2023-01-01 → 2025-12-31 |
| MCL | Health-based | Resolved | 2023-01-01 → 2025-12-31 |
| MCL | Health-based | Resolved | 2023-01-01 → 2025-12-31 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 37.81 µg/L No EPA limit set | 44/44 | SYR4 | 2014–2019 |
| Chloroform | 64.1 µg/L No EPA limit set | 44/44 | SYR4 | 2014–2019 |
| Dibromochloromethane | 26.28 µg/L No EPA limit set | 44/44 | SYR4 | 2014–2019 |
| TTHM | 127.93 µg/L 160% of the EPA limit, in the worst sample — 80 µg/L | 44/44 | SYR4 | 2014–2019 |
| Bromoform | 4.83 µg/L No EPA limit set | 43/44 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 37.6 µg/L 63% of the EPA limit 60 µg/L | 43/44 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 11.8 µg/L No EPA limit set | 43/44 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 21.5 µg/L No EPA limit set | 42/44 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 5.46 µg/L No EPA limit set | 41/44 | SYR4 | 2014–2019 |
| Copper | 210 µg/L 16% of the EPA limit 1300 µg/L | 35/40 | SYR4 | 2014–2017 |
| Lead | 0.0013 mg/L 8.7% of the EPA limit 0.0150 mg/L | 27/27 | LCR | 2025 |
| Lead | 3.3 µg/L 22% of the EPA limit 15 µg/L | 6/40 | SYR4 | 2014–2017 |
| Monobromoacetic Acid | 6.45 µg/L No EPA limit set | 5/44 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 3.59 µg/L No EPA limit set | 4/44 | SYR4 | 2014–2019 |
30 contaminants tested, none detected
Utility contact
Frequently asked questions about Fort Massac Pwd
Is Fort Massac Pwd tap water safe to drink?
EPA monitoring detected 14 contaminants in Fort Massac Pwd's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Fort Massac Pwd's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Fort Massac Pwd serve?
Fort Massac Pwd reports serving 6,290 people in Illinois, per its EPA record.
Has Fort Massac Pwd had any water quality violations?
The EPA has 21 violations on file for Fort Massac Pwd, of which 15 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.