Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2019-06-01 → 2019-06-30 |
| MON | Monitoring | Resolved | 2019-06-01 → 2019-06-30 |
| MON | Monitoring | Resolved | 2019-06-01 → 2019-06-30 |
| MON | Monitoring | Resolved | 2019-06-01 → 2019-06-30 |
| MR | Monitoring | Archived | 1998-10-01 → 1998-12-31 |
| MR | Monitoring | Archived | 1998-10-01 → 1998-12-31 |
| MR | Monitoring | Resolved | 1988-10-01 |
| MR | Monitoring | Resolved | 1988-10-01 |
| MR | Monitoring | Resolved | 1988-10-01 |
| MR | Monitoring | Resolved | 1988-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2023 |
| Copper | 1225 µg/L 94% of the EPA limit 1300 µg/L
worst single sample: 1400 µg/L | 6/10 | SYR4 | 2014–2017 |
| Arsenic | 5.6 µg/L 56% of the EPA limit 10 µg/L
worst single sample: 6 µg/L | 3/3 | SYR4 | 2013–2019 |
| Chloroform | 3.13 µg/L No EPA limit set
worst single sample: 3.2 µg/L | 2/3 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 1.285 pCi/L 26% of the EPA limit 5 pCi/L
worst single sample: 1.3 pCi/L | 2/2 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 4.9 µg/L No EPA limit set
worst single sample: 5 µg/L | 2/3 | SYR4 | 2013–2019 |
| Nitrite | 97.5 µg/L 9.8% of the EPA limit 1000 µg/L
worst single sample: 100 µg/L | 2/5 | SYR4 | 2013–2019 |
| Bromodichloromethane | 0.5000 µg/L No EPA limit set | 1/3 | SYR4 | 2013–2019 |
| Fluoride | 420 µg/L 11% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2013 |
| TTHM | 3.7 µg/L 4.6% of the EPA limit 80 µg/L | 1/3 | SYR4 | 2013–2019 |
| Toluene | 1.5 µg/L 0.2% of the EPA limit 1000 µg/L | 1/5 | SYR4 | 2017–2019 |
| Xylenes, Total | 0.6000 µg/L 0% of the EPA limit 10000 µg/L | 1/5 | SYR4 | 2017–2019 |
| O-Dichlorobenzene | 1.3 µg/L 0.2% of the EPA limit 600 µg/L | 1/2 | SYR4 | 2013–2017 |
46 contaminants tested, none detected
Utility contact
Frequently asked questions about Rake Water Supply
Is Rake Water Supply tap water safe to drink?
EPA monitoring detected 13 contaminants in Rake Water Supply's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Rake Water Supply's water?
EPA monitoring detected Lead, Copper, Arsenic, Chloroform, Combined Radium (-226 And -228), and others. The full list with the level and data source for each is above.
How many people does Rake Water Supply serve?
Rake Water Supply reports serving 186 people in Iowa, per its EPA record.
Has Rake Water Supply had any water quality violations?
The EPA has 48 violations on file for Rake Water Supply, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.