Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2014-03-01 → 2014-03-31 |
| MCL | Health-based | Resolved | 2014-03-01 → 2014-03-31 |
| MCL | Health-based | Resolved | 2014-03-01 → 2014-03-31 |
| MCL | Health-based | Resolved | 2014-03-01 → 2014-03-31 |
| MCL | Health-based | Resolved | 2014-03-01 → 2014-03-31 |
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
| MR | Monitoring | Resolved | 2010-07-01 → 2012-08-31 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| PFBS | 0.0035 µg/L | 2/2 | 2024 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 950 µg/L 73% of the EPA limit 1300 µg/L | 18/20 | SYR4 | 2014–2017 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2023 |
| Nitrate | 225 µg/L 2.3% of the EPA limit 10000 µg/L | 12/18 | SYR4 | 2012–2019 |
| Bromodichloromethane | 10 µg/L No EPA limit set | 8/8 | SYR4 | 2013–2019 |
| Chloroform | 15 µg/L No EPA limit set | 8/8 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1 µg/L No EPA limit set | 8/8 | SYR4 | 2013–2019 |
| Dibromochloromethane | 5.3 µg/L No EPA limit set | 8/8 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 6 µg/L No EPA limit set | 8/8 | SYR4 | 2013–2019 |
| TTHM | 30 µg/L 38% of the EPA limit 80 µg/L | 8/8 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 13 µg/L 22% of the EPA limit 60 µg/L | 8/8 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 5 µg/L No EPA limit set | 8/8 | SYR4 | 2013–2019 |
| Lead | 6.5 µg/L 43% of the EPA limit 15 µg/L | 4/20 | SYR4 | 2014–2017 |
| Barium | 170 µg/L 8.5% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2014 |
| Fluoride | 270 µg/L 6.8% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2014 |
| Lithium | 11 µg/L No EPA limit set | 1/2 | UCMR-5 | 2024 |
72 contaminants tested, none detected
Utility contact
Frequently asked questions about Cambridge Water Supply
Is Cambridge Water Supply tap water safe to drink?
EPA monitoring detected 16 contaminants in Cambridge Water Supply's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Cambridge Water Supply's water?
EPA monitoring detected Copper, Lead, Nitrate, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Cambridge Water Supply serve?
Cambridge Water Supply reports serving 832 people in Iowa, per its EPA record.
Has Cambridge Water Supply had any water quality violations?
The EPA has 33 violations on file for Cambridge Water Supply, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.