← Iowa

Tap water quality report

Shenandoah Water Dept

EPA monitoring tested this supplier for 91 contaminants and detected 16. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

91
contaminants tested
16
detected
4,925
people served
12
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Page

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

12
health-based violations
129
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 1993-07-01 → 1993-07-31
MCL Health-based Resolved 1993-07-01 → 1993-07-31
MCL Health-based Resolved 1993-07-01 → 1993-07-31
MCL Health-based Resolved 1993-07-01 → 1993-07-31
MCL Health-based Resolved 1993-07-01 → 1993-07-31
MCL Health-based Resolved 1993-07-01 → 1993-07-31
MCL Health-based Resolved 1993-07-01 → 1993-07-31
MCL Health-based Resolved 1993-07-01 → 1993-07-31
MCL Health-based Resolved 1993-07-01 → 1993-07-31
MCL Health-based Resolved 1993-07-01 → 1993-07-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
6100 µg/L 61%
of the EPA limit 10000 µg/L
68/68 SYR4 2012–2019
Lead
0.00050 mg/L 3.3%
of the EPA limit 0.0150 mg/L
14/14 LCR 2025
Bromodichloromethane
9 µg/L
No EPA limit set
8/8 SYR4 2012–2019
Bromoform
8.6 µg/L
No EPA limit set
8/8 SYR4 2012–2019
Chloroform
5.8 µg/L
No EPA limit set
8/8 SYR4 2012–2019
Dibromochloromethane
11 µg/L
No EPA limit set
8/8 SYR4 2012–2019
TTHM
30 µg/L 38%
of the EPA limit 80 µg/L
8/8 SYR4 2012–2019
Dibromoacetic Acid
3 µg/L
No EPA limit set
7/8 SYR4 2012–2019
Dichloroacetic Acid
3 µg/L
No EPA limit set
3/8 SYR4 2012–2019
Lead
3 µg/L 20%
of the EPA limit 15 µg/L
2/60 SYR4 2013–2019
Lithium
13 µg/L
No EPA limit set
2/2 UCMR-5 2023
Copper
350 µg/L 27%
of the EPA limit 1300 µg/L
1/60 SYR4 2013–2019
Fluoride
660 µg/L 17%
of the EPA limit 4000 µg/L
1/1 SYR4 2013
Monobromoacetic Acid
2 µg/L
No EPA limit set
1/8 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
7 µg/L 12%
of the EPA limit 60 µg/L
1/8 SYR4 2012–2019
Trichloroacetic Acid
2 µg/L
No EPA limit set
1/8 SYR4 2012–2019
75 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBariumBenzeneBenzo(A)PyreneChlorobenzeneCadmiumCarbon TetrachlorideChromiumCombined Radium (-226 And -228)DichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylbenzeneGlyphosateHfpo-DaLassoMercuryMonochloroacetic AcidNetfosaaNfdhaNmefosaaNitritePfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
SHENANDOAH WATER DEPT
Phone
712-246-3372
Email
tmartin@shenandoahiowa.net

Frequently asked questions about Shenandoah Water Dept

Is Shenandoah Water Dept tap water safe to drink?

EPA monitoring detected 16 contaminants in Shenandoah Water Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Shenandoah Water Dept's water?

EPA monitoring detected Nitrate, Lead, Bromodichloromethane, Bromoform, Chloroform, and others. The full list with the level and data source for each is above.

How many people does Shenandoah Water Dept serve?

Shenandoah Water Dept reports serving 4,925 people in Iowa, per its EPA record.

Has Shenandoah Water Dept had any water quality violations?

The EPA has 129 violations on file for Shenandoah Water Dept, of which 12 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.