Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-01-01 → 2015-03-31 |
| MCL | Health-based | Resolved | 2015-01-01 → 2015-03-31 |
| MCL | Health-based | Resolved | 2015-01-01 → 2015-03-31 |
| MCL | Health-based | Resolved | 2015-01-01 → 2015-03-31 |
| MCL | Health-based | Resolved | 2003-10-01 → 2003-10-31 |
| MCL | Health-based | Resolved | 2003-10-01 → 2003-10-31 |
| MCL | Health-based | Resolved | 2003-10-01 → 2003-10-31 |
| MCL | Health-based | Resolved | 2003-10-01 → 2003-10-31 |
| MCL | Health-based | Resolved | 2003-10-01 → 2003-10-31 |
| MCL | Health-based | Resolved | 1995-09-01 → 1995-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Fluoride | 1960 µg/L 49% of the EPA limit 4000 µg/L | 96/96 | SYR4 | 2012–2019 |
| Copper | 275 µg/L 21% of the EPA limit 1300 µg/L | 90/90 | SYR4 | 2012–2018 |
| Lead | 21.9 µg/L 146% of the EPA limit, in the worst sample — 15 µg/L | 56/90 | SYR4 | 2012–2018 |
| Nitrate | 1400 µg/L 14% of the EPA limit 10000 µg/L | 32/64 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 5.6 pCi/L 112% of the EPA limit, in the worst sample — 5 pCi/L | 16/16 | SYR4 | 2012–2018 |
| Lead | 0.0083 mg/L 55% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2024 |
| Lithium | 182 µg/L No EPA limit set | 8/8 | UCMR-5 | 2025 |
| Nitrite | 360 µg/L 36% of the EPA limit 1000 µg/L | 5/23 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.04 µg/L No EPA limit set | 4/16 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 2.08 µg/L No EPA limit set | 4/16 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 5.27 µg/L No EPA limit set | 4/15 | SYR4 | 2012–2019 |
| Barium | 81.7 µg/L 4.1% of the EPA limit 2000 µg/L | 3/3 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 6.23 µg/L 10% of the EPA limit 60 µg/L | 2/16 | SYR4 | 2012–2019 |
| Arsenic | 1.1 µg/L 11% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2012–2019 |
| Bromodichloromethane | 0.9900 µg/L No EPA limit set | 1/16 | SYR4 | 2012–2019 |
| Chloroform | 0.5900 µg/L No EPA limit set | 1/16 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.28 µg/L No EPA limit set | 1/16 | SYR4 | 2012–2019 |
| Gross Beta Particle Activity | 12 pCi/L No EPA limit set | 1/1 | SYR4 | 2015 |
| Selenium | 1.7 µg/L 3.4% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2012–2019 |
| TTHM | 2.86 µg/L 3.6% of the EPA limit 80 µg/L | 1/16 | SYR4 | 2012–2019 |
74 contaminants tested, none detected
Utility contact
Frequently asked questions about Marion Municipal Water Dept
Is Marion Municipal Water Dept tap water safe to drink?
EPA monitoring detected 20 contaminants in Marion Municipal Water Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Marion Municipal Water Dept's water?
EPA monitoring detected Fluoride, Copper, Lead, Nitrate, Combined Radium (-226 And -228), and others. The full list with the level and data source for each is above.
How many people does Marion Municipal Water Dept serve?
Marion Municipal Water Dept reports serving 41,623 people in Iowa, per its EPA record.
Has Marion Municipal Water Dept had any water quality violations?
The EPA has 28 violations on file for Marion Municipal Water Dept, of which 10 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.