Tap WaterIndex

← Iowa

Tap water quality report

Cedar Terrace Mhc

EPA monitoring tested this supplier for 14 contaminants and detected 10. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

14
contaminants tested
10
detected
600
people served
2
health-based violations
Iowa rankingsLead in IowaPFAS in Iowa
Water source
GUP
Ownership
Private
Counties served
Linn

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

2
health-based violations
72
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 1996-01-01 → 1996-01-31
MCL Health-based Resolved 1996-01-01 → 1996-01-31
MR Monitoring Resolved 2014-08-01 → 2014-08-31
MR Monitoring Resolved 2014-08-01 → 2014-08-31
MR Monitoring Resolved 2014-08-01 → 2014-08-31
MR Monitoring Resolved 2014-08-01 → 2014-08-31
MR Monitoring Resolved 2014-08-01 → 2014-08-31
MR Monitoring Resolved 2014-08-01 → 2014-08-31
MR Monitoring Resolved 2014-08-01 → 2014-08-31
MR Monitoring Resolved 2014-08-01 → 2014-08-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the single worst sample on record — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Chloroform
4 µg/L
No EPA limit set
 20/20 SYR4 2012–2019
Dichloroacetic Acid
5 µg/L
No EPA limit set
 20/20 SYR4 2012–2019
TTHM
4.7 µg/L 5.9%
of the EPA limit 80 µg/L
 13/20 SYR4 2012–2019
Copper
40 µg/L 3.1%
of the EPA limit 1300 µg/L
 11/28 SYR4 2014–2018
Bromodichloromethane
0.7000 µg/L
No EPA limit set
 10/20 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 10/10 LCR 2024
Lead
2 µg/L 13%
of the EPA limit 15 µg/L
 5/28 SYR4 2014–2018
Monochloroacetic Acid
3 µg/L
No EPA limit set
 1/20 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
6 µg/L 10%
of the EPA limit 60 µg/L
 1/20 SYR4 2012–2019
Trichloroacetic Acid
0.8400 µg/L
No EPA limit set
 1/20 SYR4 2012–2019
4 contaminants tested, none detected
BromoformDibromoacetic AcidDibromochloromethaneMonobromoacetic Acid

Utility contact

Contact
CEDAR TERRACE MHC
Phone
641-521-0741
Email
guypom@pcpartner.net

Frequently asked questions about Cedar Terrace Mhc

Is Cedar Terrace Mhc tap water safe to drink?

EPA monitoring detected 10 contaminants in Cedar Terrace Mhc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Cedar Terrace Mhc's water?

EPA monitoring detected Chloroform, Dichloroacetic Acid, TTHM, Copper, Bromodichloromethane, and others. The full list with the level and data source for each is above.

How many people does Cedar Terrace Mhc serve?

Cedar Terrace Mhc reports serving 600 people in Iowa, per its EPA record.

Has Cedar Terrace Mhc had any water quality violations?

The EPA has 72 violations on file for Cedar Terrace Mhc, of which 2 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.