Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2019-06-01 → 2019-06-30 |
| MON | Monitoring | Resolved | 2019-06-01 → 2019-06-30 |
| MON | Monitoring | Resolved | 2019-06-01 → 2019-06-30 |
| MON | Monitoring | Resolved | 2019-06-01 → 2019-06-30 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
| MR | Monitoring | Resolved | 2014-08-01 → 2014-08-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 1110 µg/L 85% of the EPA limit 1300 µg/L | 60/60 | SYR4 | 2013–2019 |
| Fluoride | 970 µg/L 24% of the EPA limit 4000 µg/L | 15/15 | SYR4 | 2012–2014 |
| Lead | 106 µg/L 707% of the EPA limit, in the worst sample — 15 µg/L | 15/60 | SYR4 | 2013–2019 |
| Lead | 0.0012 mg/L 8% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Barium | 81.8 µg/L 4.1% of the EPA limit 2000 µg/L | 2/2 | SYR4 | 2013–2014 |
| Chloroform | 0.6100 µg/L No EPA limit set | 2/7 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 1.76 µg/L No EPA limit set | 2/7 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 0.6100 µg/L No EPA limit set | 2/7 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 3.4 pCi/L 68% of the EPA limit 5 pCi/L | 1/3 | SYR4 | 2012–2015 |
83 contaminants tested, none detected
Utility contact
Frequently asked questions about Evansdale Water Works
Is Evansdale Water Works tap water safe to drink?
EPA monitoring detected 9 contaminants in Evansdale Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Evansdale Water Works's water?
EPA monitoring detected Copper, Fluoride, Lead, Lead, Barium, and others. The full list with the level and data source for each is above.
How many people does Evansdale Water Works serve?
Evansdale Water Works reports serving 4,561 people in Iowa, per its EPA record.
Has Evansdale Water Works had any water quality violations?
The EPA has 16 violations on file for Evansdale Water Works, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.