Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 2025-08-01 → 2025-08-31 |
| MR | Monitoring | Archived | 2025-03-01 → 2025-03-31 |
| MR | Monitoring | Resolved | 2007-01-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 3000 µg/L 30% of the EPA limit 10000 µg/L | 14/16 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 8/8 | LCR | 2024 |
| Fluoride | 190 µg/L 4.8% of the EPA limit 4000 µg/L | 6/6 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 2.8695 µg/L 4.8% of the EPA limit 60 µg/L
worst single sample: 3.09 µg/L | 4/4 | SYR4 | 2012–2018 |
| Barium | 6.75 µg/L 0.3% of the EPA limit 2000 µg/L
worst single sample: 6.9 µg/L | 3/3 | SYR4 | 2012–2018 |
| TTHM | 8.506 µg/L 11% of the EPA limit 80 µg/L
worst single sample: 8.9 µg/L | 3/4 | SYR4 | 2012–2018 |
| Antimony, Total | 0.1950 µg/L 3.3% of the EPA limit 6 µg/L
worst single sample: 0.2000 µg/L | 2/3 | SYR4 | 2012–2018 |
| Arsenic | 0.8700 µg/L 8.7% of the EPA limit 10 µg/L
worst single sample: 0.9000 µg/L | 2/3 | SYR4 | 2012–2018 |
| Chromium | 1.865 µg/L 1.9% of the EPA limit 100 µg/L
worst single sample: 1.9 µg/L | 2/3 | SYR4 | 2012–2018 |
| Selenium | 5.845 µg/L 12% of the EPA limit 50 µg/L
worst single sample: 6 µg/L | 2/3 | SYR4 | 2012–2018 |
| Thallium, Total | 0.1000 µg/L 5% of the EPA limit 2 µg/L | 2/3 | SYR4 | 2012–2018 |
| Copper | 1.6 µg/L 0.1% of the EPA limit 1300 µg/L | 1/3 | SYR4 | 2012–2018 |
| Cyanide | 1.1 µg/L 0.6% of the EPA limit 200 µg/L | 1/3 | SYR4 | 2012–2018 |
| Lead | 0.1000 µg/L 0.7% of the EPA limit 15 µg/L | 1/3 | SYR4 | 2012–2018 |
| Xylenes, Total | 0.6000 µg/L 0% of the EPA limit 10000 µg/L | 1/9 | SYR4 | 2012–2018 |
53 contaminants tested, none detected
Utility contact
Frequently asked questions about Jumper Creek Utility Company
Is Jumper Creek Utility Company tap water safe to drink?
EPA monitoring detected 15 contaminants in Jumper Creek Utility Company's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Jumper Creek Utility Company's water?
EPA monitoring detected Nitrate, Lead, Fluoride, Total Haloacetic Acids (HAA5), Barium, and others. The full list with the level and data source for each is above.
How many people does Jumper Creek Utility Company serve?
Jumper Creek Utility Company reports serving 115 people in Florida, per its EPA record.
Has Jumper Creek Utility Company had any water quality violations?
The EPA has 3 violations on file for Jumper Creek Utility Company, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.