Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
| MCL | Health-based | Resolved | 2015-10-01 → 2015-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 107 µg/L 134% of the EPA limit, in the worst sample — 80 µg/L | 54/54 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 78.22 µg/L 130% of the EPA limit, in the worst sample — 60 µg/L | 52/52 | SYR4 | 2012–2019 |
| Dalapon | 3 µg/L 1.5% of the EPA limit 200 µg/L | 12/19 | SYR4 | 2012–2019 |
| Fluoride | 250 µg/L 6.3% of the EPA limit 4000 µg/L | 10/10 | SYR4 | 2012–2018 |
| Lead | 0.0017 mg/L 11% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2024 |
| Barium | 28 µg/L 1.4% of the EPA limit 2000 µg/L | 5/5 | SYR4 | 2012–2018 |
| Copper | 9.2 µg/L 0.7% of the EPA limit 1300 µg/L | 5/5 | SYR4 | 2012–2018 |
| Ethylbenzene | 1.1 µg/L 0.2% of the EPA limit 700 µg/L | 5/15 | SYR4 | 2012–2019 |
| Xylenes, Total | 8.2 µg/L 0.1% of the EPA limit 10000 µg/L | 5/15 | SYR4 | 2012–2019 |
| Antimony, Total | 1.1 µg/L 18% of the EPA limit 6 µg/L | 3/5 | SYR4 | 2012–2018 |
| Heptachlor | 0.0400 µg/L 10% of the EPA limit 0.4000 µg/L | 2/8 | SYR4 | 2012–2018 |
| Methoxychlor | 0.2200 µg/L 0.5% of the EPA limit 40 µg/L | 2/15 | SYR4 | 2012–2019 |
| 1,2,4-Trichlorobenzene | 0.6000 µg/L 0.9% of the EPA limit 70 µg/L | 1/12 | SYR4 | 2012–2019 |
| Cyanide | 7.8 µg/L 3.9% of the EPA limit 200 µg/L | 1/5 | SYR4 | 2012–2018 |
| Cadmium | 0.2000 µg/L 4% of the EPA limit 5 µg/L | 1/5 | SYR4 | 2012–2018 |
| Hexachlorocyclopentadiene | 0.0130 µg/L 0% of the EPA limit 50 µg/L | 1/12 | SYR4 | 2012–2019 |
| Lead | 0.1000 µg/L 0.7% of the EPA limit 15 µg/L | 1/5 | SYR4 | 2012–2018 |
| Simazine | 0.0650 µg/L 1.6% of the EPA limit 4 µg/L | 1/9 | SYR4 | 2012–2018 |
| Toluene | 0.4400 µg/L 0% of the EPA limit 1000 µg/L | 1/8 | SYR4 | 2012–2018 |
52 contaminants tested, none detected
Utility contact
Frequently asked questions about Waverly Water
Is Waverly Water tap water safe to drink?
EPA monitoring detected 19 contaminants in Waverly Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Waverly Water's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Dalapon, Fluoride, Lead, and others. The full list with the level and data source for each is above.
How many people does Waverly Water serve?
Waverly Water reports serving 1,479 people in Florida, per its EPA record.
Has Waverly Water had any water quality violations?
The EPA has 56 violations on file for Waverly Water, of which 24 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.