Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2015-01-01 → 2015-03-31 |
| MCL | Health-based | Resolved | 2015-01-01 → 2015-03-31 |
| MCL | Health-based | Resolved | 2014-10-01 → 2014-12-31 |
| MCL | Health-based | Resolved | 2014-10-01 → 2014-12-31 |
| MCL | Health-based | Resolved | 2014-10-01 → 2014-12-31 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Total Haloacetic Acids (HAA5) | 19.2005 µg/L 32% of the EPA limit 60 µg/L
worst single sample: 21.75 µg/L | 40/40 | SYR4 | 2012–2019 |
| TTHM | 111.475 µg/L 139% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 152.96 µg/L | 38/38 | SYR4 | 2012–2019 |
| Lead | 0.00050 mg/L 3.3% of the EPA limit 0.0150 mg/L | 21/21 | LCR | 2024 |
| Fluoride | 1000 µg/L 25% of the EPA limit 4000 µg/L | 6/6 | SYR4 | 2012–2018 |
| Barium | 13.47 µg/L 0.7% of the EPA limit 2000 µg/L
worst single sample: 14 µg/L | 3/3 | SYR4 | 2012–2018 |
| Copper | 8.78 µg/L 0.7% of the EPA limit 1300 µg/L
worst single sample: 9.5 µg/L | 3/3 | SYR4 | 2012–2018 |
| Combined Uranium | 0.1174 µg/L 0.4% of the EPA limit 30 µg/L
worst single sample: 0.1177 µg/L | 3/11 | SYR4 | 2012–2019 |
| Antimony, Total | 0.1000 µg/L 1.7% of the EPA limit 6 µg/L | 1/3 | SYR4 | 2012–2018 |
| Arsenic | 0.7000 µg/L 7% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2012–2018 |
| Dichloromethane | 0.4900 µg/L 9.8% of the EPA limit 5 µg/L | 1/11 | SYR4 | 2012–2019 |
| Selenium | 3 µg/L 6% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2012–2018 |
59 contaminants tested, none detected
Utility contact
Frequently asked questions about Hawaiian Isles Mhp
Is Hawaiian Isles Mhp tap water safe to drink?
EPA monitoring detected 11 contaminants in Hawaiian Isles Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hawaiian Isles Mhp's water?
EPA monitoring detected Total Haloacetic Acids (HAA5), TTHM, Lead, Fluoride, Barium, and others. The full list with the level and data source for each is above.
How many people does Hawaiian Isles Mhp serve?
Hawaiian Isles Mhp reports serving 250 people in Florida, per its EPA record.
Has Hawaiian Isles Mhp had any water quality violations?
The EPA has 149 violations on file for Hawaiian Isles Mhp, of which 75 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.